Bit-RDU Mobile LCD

IP67 (NEMA 6) Fully-Enclosed Submersible Machined
6061 T6 Aluminum Enclosure

8.4 inches

Harsh Duty LCD cell w/ Optically Bonded Protective
Overlay (VBOND)

Standard: SVGA 800 x 600 Native
Optional: XGA 1024 x 768 native

True High Brightness:
Standard SVGA Type: 1500 nits (cd/m2)
Optional XGA Type: 1100 nits (cd/m2)
Low-Power, high reliability Solid State LED Backlighting

0.213 x 0.213 (Optional 0.1665 x 0.1665 w/ XGA)

25ms (25ms with XGA panel)

16.77 M

5000:1 minimum

VarTech’s advanced VTLED driver technology, the latest in technology for driving solid state High Bright Light Emitting Diodes (HBLEDs)

Standard SVGA: Up/Dwn/L/R: 80°/60°/80°/80°
Optional XGA: Up/Dwn/L/R: 88°/88°/88°/88°

Standard SVGA Type: 600:1
Optional XGA Type: 400:1

- IP67 Sealed VGA Connector for Computer interface

- IP67 Sealed Single VGA Connector, Single Composite
BNC Feed for NTSC/PAL, Optional Touch Interface
- IP67 Sealed Single VGA Connector, Dual Composite
BNC Feed for NTSC/PAL, Optional Touch Interface
- IP67 Sealed Single Composite BNC Feed for NTSC/PAL
- IP67 Sealed Dual Separate Composite BNC Feed for NTSC/PAL
- IP67 Sealed Three Separate Composite BNC Feed for NTSC/PAL
- IP67 DVI Input only or with various combinations including VGA and BNC video feeds
- IP67 Sealed Four Separate Composite BNC Feed for NTSC/PAL
COMING SOON, CALL
- IP67 Sealed Dual VGA Connectors with/without Optional Touch Interface
- IP67 Sealed Dual VGA Connectors, Single CompositeBNC Feed for NTSC/PAL, Optional Touch Interface
- IP67 Sealed Dual VGA Connectors, Dual Composite BNC Feed for NTSC/PAL, Optional Touch Interface

Harsh Duty Variable Power Supply, 9 to 36 VDC, Wide
Range, Low Noise, Wide Operational Temperature
(Optional AC Power, Universal Input 85 to 264 VAC)

SVGA Panel - 25 watts, 32 watts w/heater
XGA Panel - 38 watts, 45 watts w/heater

VarTech’s Harsh Environment Controller Board
Backlight MTBF
65,000 hours

Standard: -20° to +70°C (-4°F to 158°F)
Optional: -40° to +70°C (-40°F to 158°F)

-40° to +75°C (-40°F to 167°F)

W - 10.742", H - 7.809", Depth - 2.59"

Operating: 0 to 100%

10,000 ft. (optional 45,000 ft.)

Designed to meet FCC Class B (optional MIL-STD-461E)

Designed to meet MIL-S-901D

5.5 lbs.
Vibration
Designed to meet MIL-STD-167
Designed to meet Marine IEC 60945 and IACS-E10

Designed to meet MIL-STD-810F
Airborne Equipment Environmental Conditions
Designed to meet DO-160E
MIL-L-85762A
sunlight readability (air force - open canopy)
MIL-C-22750 (CARC)
Enclosure aluminum, black finish with Corrosion Protection
All input connectors are rated for full submersion
including:
Power, VGA, Touch and BNC Composite Video and to ensure that each connector maintains its sealing, the socket is additionally tested for helium leakage (according MIL 1344A)
Available
Optional MIL-DTL-38999 qualified - connectors

wide range DC power input 9-36 VDC (12 VDC, 24 VDC, 28 VDC nominal)

Length - 3m (9’10”) each
Available IP67 Connector (monitor end) Cables:
Power
Video - 15-pin D-Sub
Touch (optional) - Serial or USB
Direct Composite BNC Video Feed (optional)

5-Wire, Durable, Resistive OR Armor Touch

RAM/VESA Mounting - standard
Flush Mounting - optional
Console Mounting

Internal Short Circuit Protection, Load Dump Protection,
Over Voltage Protection, Reverse Polarity Protection

Optional “Right Angle” Connectors

MIL-STD-461E (FCC Class B is standard)

2 years