Пром. автоматизация
» » »

Bit-IPC Switch-MIL

Bit-IPC Switch-MIL
Производитель: Beltronic
Артикул: Bit-IPC Switch-MIL
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Features:
  • Robust 12 port deterministic Ethernet switch for critical real-time applications
  • Future-proof 3U VPX Vita 46.0 form factor with conduction cooling
  • Secure partitioning between three traffic classes (time-triggered, rate-constrained and standard Ethernet traffic)
  • 24 Gbit/s full wire-speed performance
  • Built-in management module
  • Enables fault-tolerant high-speed data communication backbones in/on vehicles with > 80 % effective bandwidth

The Bit-IPC Switch-MIL technology enables hard real-time operation in safety-critical distributed systems based on Ethernet networks. Bit-IPC MIL switches and end systems maintain the hard real-time data communication and take care of robust partitioning among standard Ethernet, rate-constrained and time-triggered Ethernet traffic. High-priority time-triggered messages are routed through the switch according to a predefined schedule with fixed latency and a transmission jitter in the submicrosecond range. Rate-constrained messages are routed and policed according to their guaranteed bandwidth. All other Ethernet messages are forwarded when bandwidth is available.


12 Full-Duplex 1 Gbit/s Ethernet Ports

The Bit-IPC Switch-MIL is a high-speed deterministic Ethernet switch enabling critical network centric applications in harsh environments. The high-performance switch enables packet processing at all twelve ports with full line speeds. TTEthernet technology allows to conveniently configure the switch during system design time for deterministic processing of critical (time-triggered, rate-constrained) and non-critical Ethernet traffic.


    Key Features
    12 x 1 Gbit/s full-duplex Ethernet via rear I/O (1000 Base-T)
    24 Gbit/s cross-sectional bandwidth (12 x full-duplex Ethernet links)
    1.5 Mbit on-chip memory
    256 Mbit Flash memory for storing the switch configuration
    TTEthernet implementation supports up to three redundant channel setups
    Implementation
    12 ports running at 1 Gbit/s full duplex
    8 sub schedules
    16 clock sync masters
    4096 virtual links
    256 shared BAGs
    Store-and-forward switch architecture
    Manageable via network (configuration data download, diagnosis data queries, scheduled diagnosis status) through standard Ethernet frames
    Related Products
    TTEPMC Card Rugged for deterministic end systems
    TTELoad: GUI and batch tool for downloading switch configurations
    TTEBuild: Allows creation of a binary device configuration
    Supported Standards
    IEEE 802.3-2005 (switching, flow control)
    SAE AS6802 (TTEthernet draft)
    ARINC 664 part 7 (layer 2 switching/policing)
    IEEE 1588 (transparent clock support)
    Physical Specifications
    3U VPX form factor
    Rugged conduction-cooled
    VITA 46.0, proposed pinout VITA 46.20 resp. VITA 65 SLT3-SWH-2F12T-14.4.8
    Size: 160 x 115 x 30 (in mm)
    Weight: approx. 600 g
    Power consumption: < 19 W typ.
    Environmental Operating Ranges
    Operational temperature: -40 °C to +70 °C
    Storage temperature: -55 °C to +125 °C
    Operating/non-operating humidity: Humidity level from 0 to 95 % condensing
    Vibration sine: 10 g peak, 15 to 2k Hz
    Vibration random 0.1 g2/Hz, 15 to 2k Hz
    Certification
    DO-254 Certification package for the TTEthernet switch controller chip IP available
    TTEVerify: A qualified software tool for production programs for automated device configuration verification (planned)
    Нет отзывов об этом товаре.

    Написать отзыв о Bit-IPC Switch-MIL

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке:



    Отправить