FDT-Framework PACTware 3.6
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
- Universal DTM host platform
- For all DTMs of Pepperl+Fuchs
- Approved FDT/DTM technology
- Free of charge
- Internet download possible
Технические характеристики: PACTware 3.6
| Интерфейс | ||
| Подключение | adapter with RS 232 interface K-ADP1 or USB interface K-ADP-USB (for K-System) adapter for gateways with RS 232 intrface K-ADP2 (for RPI-System) adapter for gateways with RS 485 interface K-ADP4 (for RPI-System) USB/RS 485 interface converter (for LB-System) | |
| Software | ||
| Требования к оборудованию | PACTware 3.X requires 50 MBytes hard drive memory and a minimum of 40 MBytes main memory. Depending on the complexity of the projects and the DTMs used, the main memory requirement can be greater. A computer with a Pentium IV 450 MHz processor or better is recommended, XGA graphics, and a Microsoft-compatible mouse or equivalent pointing device arealso required. | |
| Software requirements | PACTware 3.X runs in operating systems Windows 2000 and Windows XP. The software .NET Framework 1.1 SP1 must be installed. For printing and online help, MS Internet-Explorer 4.0 or higher is required. | |
| Languages | German, English, French, Spanish, Russian can be selected | |
| Licensing | PACTware 3.X does not require licensing. Please take the license conditions of the DTMs out of the data sheets of the corresponding DTMs. | |
| Configuration | ||
| Representation of the system configuration | Graphic representation of all communication and device DTMs in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be open simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
| System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk or disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
| Associated products | CD-ROM with PACTware 3.X and complete DTM-Collection of all available DTMs of the Pepperl+Fuchs H-, K-, and E-System devices, HART Multiplexers, Remote I/O-Systems, FieldConnex devices, and level devices. | |
Нет отзывов об этом товаре.
Написать отзыв о FDT-Framework PACTware 3.6
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: