FDT-Framework PACTware 3.0
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
- Human machine interface
- For K, E and HiD devices
- For FieldConnex devices
- For level devices
- For HART multiplexers
- For Remote I/O systems LB and FB
Технические характеристики: PACTware 3.0
| Основные характеристики | ||
| Description | FDT framework of PACTware Consortium e. V. for use of FDT 1.2 compatible system-, device- and communication-DTMs of individual manufacturers. Presence of the Microsoft.NET Framework is a condition. | |
| Интерфейс | ||
| Подключение | Adapter with RS-232 interface K-ADP1 (for K-system) adapter for gateways with RS-232 interface K-ADP2 (for RPI-system) adapter for gateways with RS-485 interface K-ADP4 (for RPI-system) | |
| Software | ||
| Требования к оборудованию | PACTware 3.0 requires a minimum of 100 MBytes hard drive memory and 50 MBytes main memory. A computer with a Pentium III 400 MHz processor or better is recommended, XGA graphics and a Microsoft-compatible mouse or equivalent pointing device. | |
| Software requirements | PACTware 3.0 runs in operating systems Windows NT 4.0 SP6, Windows 2000 SP4 and Windows XP, XP SP1 and XP SP2. For printing and online help you require MS Internet-Explorer 4.0 or higher. Примечание also the hardware prerequisites for the device drivers. Windows 95, 98 and ME are not supported by PACTware. | |
| Languages | German, English, and French can be selected | |
| Licensing | The Pepperl+Fuchs DTM collections can be downloaded separately or altogether in a BASIC version without the functions printing and storage. The BASIC version can also be obtained on CD-ROM from Pepperl+Fuchs. The release of the functions printing and storage requires a licence number. The licences with the functionality quoted in the table can be ordered at Pepperl+Fuchs. | |
| Configuration | ||
| Representation of the system configuration | Graphic representation of all communication and device DTMs in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be open simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
| System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk or disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
Нет отзывов об этом товаре.
Написать отзыв о FDT-Framework PACTware 3.0
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: