WISE-7901D

WISE PoE Controller with LED Display (RoHS) for X-Board (X107, X109, X110, X111, X202, X203, X303, X304, X305, X308, X310, X324)

Подробные технические характеристики (спецификация)

System
Процессор	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
EEPROM	16 KB
Сторожевой таймер	Да (0.8 секунд)
NVRAM	31 Bytes
ОС	MiniOS7
Часы реального времени	RTC поддерживают секунды, минуты, часы, недели, месяцы, года, в промежутке с 1980 по 2079
64-бит ключ	Да
Интерфейсы
PoE Ethernet Port	RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1	No (Unsupported by WISE firmware)
COM 2	No (Unsupported by WISE firmware)
LED Indicators
System LED	Да
Светодиодный LED-экран	5-digit 7-segment Светодиодный LED-экран
Special Indicator	PoE LED
Hardware Expansion
I/O Expansion Bus	Да
Power Requirements
Reserve Polarity Protection	Да
Powered from PoE	Yes, IEEE 802.3af, Class 1
Consumption	2.5 W
Frame Ground	Yes (for ESD Protection)
Input Range	+12 ~ +48 VDC
Mechanical
Габариты (Ш x В x Г)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Рабочая температура	-25 °C ~ +75 °C
Допустимая температура в режиме хранения	-40 ~ +80 °C
Влажность	5 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Schedules	Setup prescheduled routine tasks.
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
AI Channel	=, and lt , and gt , and gt =, and lt = (value)
Internal Register	=, and lt , and gt , and gt =, and lt = (value)
DI Counter	=, and gt , and lt , and gt =, and lt =(value), Change
DO Counter	=, and gt , and lt , and gt =, and lt =(value), Change
Timer	Timeout, Not Timeout
Schedule	In Range, Out of Range
P2P	DI, AI, DI counter, DO counter, IR
Rule Status	Enable, Disable
THEN / ELSE Actions
DO Channel	ON, OFF, Pulse Output
AO Channel	Change the value
Internal Register	Change the value
DI Counter	Reset
DO Counter	Reset
Timer	Start, Stop
Schedule	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
P2P	DO(On/Off), AO, IR
Rule Status	Enable, Disable

Написать отзыв о WISE-7901D

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: