Ничего не куплено!
Продажа и внедрение оборудования для промышленной автоматизации
Mail: prom@protonpc.ru
Тел: (495) 789-41-64 доб. 303
Реле | |||
Количество каналов | 8 | ||
Тип выхода | Power Relay, Form A (SPST N.O.) | ||
Operating Voltage Range | 250 VAC/30 VDC | ||
Max. ток нагрузки | 5.0 A/channel at 25 °C | ||
Время срабатывания | 6 ms (Typical) | ||
Время отсоединения | 3 ms (Typical) | ||
Электрический ресурс срабатываний | |||
VDE |
| ||
UL |
| ||
Механический ресурс срабатываний | 20,000,000 ops. at no load (300 ops./minute) | ||
System | |||
Процессор | 16-bit CPU | ||
SRAM | 512 KB | ||
Flash Memory | 512 KB | ||
EEPROM | 16 KB | ||
Сторожевой таймер | Да | ||
Интерфейсы | |||
PoE Ethernet Port | 10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X | ||
2 Way Isolation | |||
I/O | 3000 Vrms | ||
EMS Protection | |||
ESD (IEC 61000-4-2) | 4 kV Contact for each terminal | ||
EFT (IEC 61000-4-4) | +/-2 kV for Power | ||
LED Indicators | |||
PoE | PoE On | ||
L1 | System Running | ||
L2 | Ethernet Link/Act | ||
L3 | Ethernet 10/100M Speed | ||
Power Requirements | |||
Reserve Polarity Protection | Да | ||
Powered from terminal block | Yes, 12 ~ 48 VDC | ||
Powered from PoE | Yes, IEEE 802.3af, Class 1 | ||
Consumption | 5.3 W | ||
Mechanical | |||
Габариты (Ш x В x Г) | 72 mm x 123 mm x 35 mm | ||
Installation | DIN-Rail or Wall mounting | ||
Environment | |||
Рабочая температура | -25 °C ~ +75 °C | ||
Допустимая температура в режиме хранения | -30 °C ~ +80 °C | ||
Влажность | 10 ~ 90% RH, non-condensing | ||
Functions | |||
Rule Configuration Website | Access Web server on WISE controllers to edit and upload logic rules through web browser. | ||
36 IF-THEN-ELSE Logic Rules | 3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions | ||
48 Internal Registers | Hold temporary variables and read/write data via Modbus/TCP address. | ||
12 Timers | Delay / Timing functions | ||
12 Emails | Send Email messages to pre-set Email receivers. | ||
12 CGI Commands | Send pre-set CGI commands. | ||
12 Recipes | Set up THEN/ELSE action groups. | ||
8 P2P remote modules | Set up the connection information for the remote WISE modules. | ||
Modbus/TCP Protocol | Real time control and monitoring I/O channels and system status of controllers via SCADA software. | ||
IF Conditions | |||
Internal Register | =, and lt , and gt , and gt =, and lt = (value) | ||
DO Counter | =, and gt , and lt , and gt =, and lt =(value), Change | ||
Timer | Timeout, Not Timeout | ||
P2P | DI, AI, DI counter, DO counter, IR | ||
Rule Status | Enable, Disable | ||
THEN / ELSE Actions | |||
DO Channel | ON, OFF, Pulse Output | ||
Internal Register | Change the value | ||
DO Counter | Reset | ||
Timer | Start, Stop | ||
Send | |||
CGI Commands | Send | ||
Recipe | Execute | ||
P2P | DO(On/Off), AO, IR | ||
Rule Status | Enable, Disable |