WISE-7160

6-channel Power Relay Output and 6-channel Isolation Digital Input PoE Module

Подробные технические характеристики (спецификация)

Дискретный ввод
Количество каналов	6
Тип входа	Wet Contact (Sink, Source)
Уровень логической " 1 "	+10 VDC ~ +50 VDC
Уровень логического " 0 "	+4 VDC Max
Входное сопротивление	10 k
Счетчики
Мах. значение	65535 (16 bits)
Max. входная частота	50 Hz
Mин. длительность импульса	10 ms
Защита от перенапряжений	+70 VDC
Реле
Количество каналов	6
Тип выхода	Power Relay, Form A (SPST N.O.)
Operating Voltage Range	250 VAC/30 VDC
Max. ток нагрузки	5.0 A/channel at 25 °C
Время срабатывания	6 ms (Typical)
Время отсоединения	3 ms (Typical)
Электрический ресурс срабатываний
VDE	5A 250 VAC 30,000 ops (10 ops/minute) at 75 °C 5A 30 VDC 70,000 ops (10 ops/minute) at 75 °C
UL	5A 250 VAC/30 VDC 6,000 ops. 3A 250 VAC/30 VDC 10,000 ops.
Механический ресурс срабатываний	20,000,000 ops. at no load (300 ops./minute)
System
Процессор	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
EEPROM	16 KB
Сторожевой таймер	Да
Интерфейсы
PoE Ethernet Port	10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2 Way Isolation
I/O	3000 Vrms
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for each terminal
EFT (IEC 61000-4-4)	+/-2 kV for Power
LED Indicators
PoE	PoE On
L1	System Running
L2	Ethernet Link/Act
L3	Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection	Да
Powered from terminal block	Yes, 12 ~ 48 VDC
Powered from PoE	Yes, IEEE 802.3af, Class 1
Consumption	4.8 W
Mechanical
Габариты (Ш x В x Г)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Рабочая температура	-25 °C ~ +75 °C
Допустимая температура в режиме хранения	-30 °C ~ +80 °C
Влажность	10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
Internal Register	=, and lt , and gt , and gt =, and lt = (value)
DI Counter	=, and gt , and lt , and gt =, and lt =(value), Change
DO Counter	=, and gt , and lt , and gt =, and lt =(value), Change
Timer	Timeout, Not Timeout
P2P	DI, AI, DI counter, DO counter, IR
Rule Status	Enable, Disable
THEN / ELSE Actions
DO Channel	ON, OFF, Pulse Output
Internal Register	Change the value
DI Counter	Reset
DO Counter	Reset
Timer	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
P2P	DO(On/Off), AO, IR
Rule Status	Enable, Disable

Написать отзыв о WISE-7160

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: