WISE-7115

7-channel RTD Input with 3-wire RTD lead resistance elimination WISE PoE Controller (RoHS)

Подробные технические характеристики (спецификация)

Аналоговый ввод
Количество каналов	7 (Differential)
Тип датчика	Pt100, Pt1000, Ni120, Cu100, Cu1000
Разрядность	16-бит
Частота выборки	12 Samples/Sec. (Total)
Точность	+/-0.05%
Дрейф нуля	+/-0.5
Дрейф шкалы	+/-20
Подавление синфазной составляющей	150 dB
Normal Mode Rejection	100 dB
Обнаружение обрыва	Да
Индивидуальная конфигурация канала	Да
Проводное подключение	2/3 wire
Входное сопротивление	and gt 1M
3-проводной RTD	Да
System
Процессор	16-bit CPU
SRAM	512 KB
Flash Memory	512 KB
EEPROM	16 KB
Сторожевой таймер	Да
Интерфейсы
PoE Ethernet Port	10/100 Base-TX (With Link, Activity LED Indicator) and automatic MDI/MDI-X
2 Way Isolation
I/O	2500 VDC
EMS Protection
ESD (IEC 61000-4-2)	4 kV Contact for each terminal and 8 kV Air for random point
EFT (IEC 61000-4-4)	+/-4 kV for Power
LED Indicators
PoE	PoE On
L1	System Running
L2	Ethernet Link/Act
L3	Ethernet 10/100M Speed
Power Requirements
Reserve Polarity Protection	Да
Powered from terminal block	Yes, 12 ~ 48 VDC
Powered from PoE	Yes, IEEE 802.3af, Class 1
Consumption	2.6 W
Mechanical
Габариты (Ш x В x Г)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall mounting
Environment
Рабочая температура	-25 °C ~ +75 °C
Допустимая температура в режиме хранения	-30 °C ~ +80 °C
Влажность	10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
8 P2P remote modules	Set up the connection information for the remote WISE modules.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
AI Channel	=, and lt , and gt , and gt =, and lt = (value)
Internal Register	=, and lt , and gt , and gt =, and lt = (value)
Timer	Timeout, Not Timeout
P2P	DI, AI, DI counter, DO counter, IR
Rule Status	Enable, Disable
THEN / ELSE Actions
Internal Register	Change the value
Timer	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
P2P	DO(On/Off), AO, IR
Rule Status	Enable, Disable

Написать отзыв о WISE-7115

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: