WISE-5800

User-defined I/O and Data Logger Module

Подробные технические характеристики (спецификация)

System
Процессор	16-bit CPU
SRAM	768 KB
Flash Memory	512 KB
EEPROM	16 KB
Сторожевой таймер	Да (0.8 секунд)
NVRAM	31 Bytes
Часы реального времени	RTC Provide seconds, minutes, hours, date of week/month month and year
microSD	Yes, can support 1 or 2 GB microSD
Интерфейсы
PoE Ethernet Port	RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators)
COM 1	RS-232 (Reserved, Unsupported by WISE firmware)
COM 2	RS-485 (D2+, D2-), self-tuner ASIC inside, non-isolated, Speed : 115200 bps max.
LED Indicators
System LED	Yes (Red)
Светодиодный LED-экран	-
Ethernet Link LED	Yes (Green : Ethernet link detected, Flashing Green : Ethernet packet received)
Hardware Expansion
I/O Expansion Bus	Да
Power Requirements
Reserve Polarity Protection	Да
Consumption	2.0 W
Frame Ground	Yes (for ESD Protection)
Input Range	+12 ~ +48 VDC
Redundant Power Input	Да
Mechanical
Габариты (Ш x В x Г)	91 mm x 123 mm x 52 mm
Installation	DIN-Rail
Environment
Рабочая температура	-25 °C ~ +75 °C
Допустимая температура в режиме хранения	-30 °C ~ +80 °C
Влажность	10 ~ 90% RH, non-condensing
Functions
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions and 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions
12 Schedules	Setup prescheduled routine tasks.
12 Emails	Send Email messages to pre-set Email receivers.
12 CGI Commands	Send pre-set CGI commands.
12 Recipes	Set up THEN/ELSE action groups.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
Data Logger	Set up the Data Logger configuration, include the data record format, and data file sending operation.
IF Conditions
DI Channel	ON, OFF, ON to OFF, OFF to ON, Change
AI Channel	=, and lt , and gt , and gt =, and lt = (value)
Internal Register	=, and lt , and gt , and gt =, and lt = (value)
DI Counter	=, and gt , and lt , and gt =, and lt =(value), Change
Timer	Timeout, Not Timeout
Schedule	In Range, Out of Range
Rule Status	Enable, Disable
THEN / ELSE Actions
DO Channel	ON, OFF, Pulse Output
AO Channel	Change the value
Internal Register	Change the value
DI Counter	Reset
Timer	Start, Stop
Schedule	Start, Stop
Email	Send
CGI Commands	Send
Recipe	Execute
Rule Status	Enable, Disable
Data Logger	Start, Stop, One-Time Log

Написать отзыв о WISE-5800

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: