WirelessHART Adapter WHA-ADP-F8B2-*-P*-GP(-1)
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
- 1-channel
- WirelessHART Adapter
- Battery operated
- Also supplies field device
- Input 2-wire HART transmitters and 2-wire HART current sources
- Output WirelessHART wireless interface
- Direct mounting on HART- or 4 mA ... 20 mA field device
- Rotatable antenna
Технические характеристики: WHA-ADP-F8B2-*-P*-GP(-1)
| Supply | ||
| Rated voltage | 7.2 V DC , battery operated | |
| Электрические параметры | ||
| Output rated operating current | 4 ... 20 mA | |
| Питание | loop power for field devices voltage 8 ... 23 V DC, adjustable in steps of 0.1 V | |
| Вход | ||
| Connectable field devices | usable for: - one point-to-point connection with a HART field device, or - one point-to-point connection with a 4 ... 20 mA field device, or - до four externally powered HART field devices operating in multidrop mode | |
| Подключение | terminals 1, 2, 3, 4, 5, 6 multiple wirings available , depending on operating mode | |
| Current | 4 ... 20 mA | |
| HART communication | ||
| Протокол | HART 7.1, backward compatible | |
| Number of devices | - one passive 4 ... 20 mA/HART field device - до 4 HART field devices in multidrop mode | |
| Transfer rate | 1200 Bit/s | |
| Parameters | primary/secondary master, preambles, retries and short address scan ranges | |
| Выход | ||
| Output variables | PV: loop current SV, TV, QV:configurable according to user requirement - adapter: temperature, battery voltage, energy consumed and estimated battery life-time - 4 ... 20 mA device: scaled or linearized process value - HART device: до four process variables | |
| Transfer characteristics | ||
| Accuracy | current input: 0.125 % of Диапазон измерений | |
| Influence of ambient temperature | current input: 5 µ-A/K | |
| Indicators/settings | ||
| Parameter assignment | - wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP) - device variables mapping - publishing of до ten burst messages in a wireless network, period and trigger mode selectable - notification of до five events from adapter and/or connected device(s) in a wireless network - scaling and linearization of 4 ... 20 mA signal of connected analog device - tuning of supply parameters for the connected device - locking/unlocking of device parameterization | |
| Соответствие директивам | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. | |
| Directive 99/5/EC | ETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001 | |
| FCC CFR47 Part 15 B and C | ANSI C63.4-2003 | |
| Conformity | ||
| Стандарты защищенности | IEC 60529 | |
| Условия окружающей среды | ||
| Рабочая температура окружающей среды | -40 ... 80 °C (-40 ... 176 °F) | |
| Температура хранения устройства | -40 ... 85 °C (-40 ... 185 °F) | |
| Vibration resistance | 20 ... 2000 Hz, 0,01 g2/Hz | |
| Физические/механические параметры | ||
| Стандарты защищенности | IP66 | |
| Материал корпуса | plastic | |
| Масса | приблизительно 750 g | |
| Dimensions | 91 x 88.5 x 100.6 mm (3.6 x 3.5 x 4 in) (without cable glands and antenna) | |
| Mounting | mounting on field device , panel or pole mounting versions see type code | |
Нет отзывов об этом товаре.
Написать отзыв о WirelessHART Adapter WHA-ADP-F8B2-*-P*-GP(-1)
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: