SMART Transmitter Power Supply KCD2-STC-Ex1.SP

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Input for 2-wire SMART transmitters and current sources
• Output for 4 mA ... 20 mA or 1 V ... 5 V
• Sink or source mode
• Housing width 12.5 mm
• Подключение посредством spring terminals
• до SIL2 acc. to IEC 61508

Описание
Input 4 mA ... 20 mA Output 4 mA ... 20 mA
Основные характеристики
Signal type		Analog input
Supply
Подключение		Power Rail or terminals 9+, 10-
Rated voltage		19 ... 30 V DC
Ripple		&le- 10 %
Rated current		&le- 45 mA
Power loss		&le- 800 mW
Потребляемая мощность		&le- 1.1 W
Вход
Подключение		terminals 1+, 2-- 3+, 4-
Input signal		4 ... 20 mA limited to приблизительно 30 mA
Падение напряжения		приблизительно 5 V on terminals 3+, 4-
Available voltage		&ge- 15 V at 20 mA terminals 1+, 2-
Выход
Подключение		terminals 5-, 6+
Load		0 ... 300 &Omega- (source mode)
Output signal		4 ... 20 mA or 1 ... 5 V (on 250 &Omega-, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 15.5 ... 26 V
Ripple		20 mV rms
Transfer characteristics
Deviation		at 20 °C (68 °F) &le- ±- 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA) &le- ±- 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA) &le- ±- 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V)
Frequency range		field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
Rise time		10 to 90 % &le- 20 ms
Соответствие директивам
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
Electromagnetic compatibility		NE 21
Стандарты защищенности		EN 60529
Условия окружающей среды
Рабочая температура окружающей среды		-20 ... 60 °C (-4 ... 140 °F)
Физические/механические параметры
Стандарты защищенности		IP20
Масса		приблизительно 100 g
Dimensions		12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 in) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with Ex-areas
EC-Type Examination Certificate		CESI 06 ATEX 021 , for additional certificates see www.pepperl-fuchs.com
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I
Statement of conformity		PF 06 CERT 0973 X
	Group, category, type of protection, temperature class	II 3G Ex nA IIC T4 Gc
Соответствие директивам
	Directive 94/9/EC	EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006 , EN 50303:2000
International Сертификаты
FM approval
	Control drawing	16-533FM-12 (cFMus)
Сертификация UL
	Control drawing	16-533FM-12 (cULus)
IECEx approval		IECEx CES 06.0001
	Approved for	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I

Написать отзыв о SMART Transmitter Power Supply KCD2-STC-Ex1.SP