Ничего не куплено!
Продажа и внедрение оборудования для промышленной автоматизации
Mail: prom@protonpc.ru
Тел: (495) 789-41-64 доб. 303
Supply | ||
Подключение | SL1: 1a, 1b(-)- 2a, 2b(+) | |
Rated voltage | 20.4 ... 30 V DC via Termination Board | |
Rated current | 28 mA at 24 V , RS 485, quiescent current | |
Power loss | 0.7 W at 24 V | |
HART signal channels (non-intrinsically safe) | ||
Number of channels | 32 | |
Conformity | HART field device input (revision 5 to 7) | |
Signal range | 0.12 Vpp < signal < 1.5 Vpp | |
Leakage current | < 3 µ-A at -20 ... 85 °C (-4 ... 185 °F) | |
Terminating resistor | external 230 ... 500 &Omega- standard (до 1000 &Omega- possible) | |
Output voltage | &ge- 400 mV ss (with the terminator resistance specified above) | |
Output resistance | 100 &Omega- or smaller, capacitive coupling | |
DC isolation | dual capacitor each channel | |
Common mode voltage | до 30 V | |
Input impedance | > 5 k&Omega- , according to HART specification | |
Input voltage range | 0.12 ... 1.5 V ss | |
Common mode voltage | max. 30 V | |
Differential mode clamping | ±- 5.2 V , for transient or AC signals | |
Common mode clamping | ±- 10 V , for transient or AC signals | |
Carrier detect level | signal > 0.12 Vpp, carrier detection activated signal < 0.08 Vpp, carrier detection not activated | |
Transmit amplitude | 200 &Omega- load, 0.43 Vpp < signal < 0.49 Vpp 500 &Omega- load, 1.1 Vpp < signal < 1.2 Vpp | |
Device type | DC isolated bus device | |
Электрическое сопротивление | high impedance | |
Data link type | HART primary and secondary | |
Field multi point support | option available upon request | |
Интерфейс | ||
Скорость передачи данных | 9600 MBit/s, 19200 MBit/s or 38400 MBit/s, selectable via switch | |
Address | 1 ... 31 , adjustable via DIP switch | |
Type | RS 485, differential pair and grounding | |
Topology | multi point, master/slave connection | |
Соответствие директивам | ||
Electromagnetic compatibility | ||
Directive 2004/108/EC | EN 61326-1:2006 | |
Conformity | ||
Electromagnetic compatibility | NE 21:2006 For further information see system description. | |
Стандарты защищенности | IEC 60529 | |
Условия окружающей среды | ||
Рабочая температура окружающей среды | 0 ... 60 °C (32 ... 140 °F) | |
Физические/механические параметры | ||
Стандарты защищенности | IP20 | |
Масса | приблизительно 140 g | |
Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 in) | |
Mounting | on Termination Board | |
International Сертификаты | ||
CSA approval | 1256050 | |
Approved for | Class I, Division 2, Groups A, B, C, D- Class I, Zone 2, IIC |
Совместимое оборудование | Наименование |
HiSHPTB/32/YOK-AIO-R-02 | HART Termination Board |
HiSHPTB/32/TR-AI-02 | HART Termination Board |
HiSHPTB/32/TR-AI-03 | HART Termination Board |
HiSHPTB/32/TR-DO-01 | HART Termination Board |
HiSHPMM/64/CONA-01 | HART Termination Board |
HiSHPTB/32/YOK-AI-R-02 | HART Termination Board |
HiS1132/CON8-H-LTX-02 | HART Termination Board |
HiSHPTB/32/TR-AO-01 | HART Termination Board |
HiSHPTB/32/TR-AI-01 | HART Termination Board |
HiSHPTB/32/MOD-AO-01 | Termination Board |
HiSHPTB/32/MOD-AI-01 | Termination Board |
HiSHPTB/32/HONB-AO-R-01 | HART Termination Board |
HiSHPTB/32/HONB-AI-01 | HART Termination Board |
HiSHPTB/32/HONB-AI-R-01 | HART Termination Board |
HiSHPTB/32/FOX2001C-02 | HART Termination Board |
HiSHPSM/32/TB-02 | Termination Board |
HiSHPTB/32/ABB1B-02 | Termination Board |
HART CommDTM | Commmunication drivers |
HART-Multiplexer DTM | DTM collection |
Generic HART-DTM | Universal DTM |
HiATB01-HART-2X16 | HART Communication Board |
HiATB01-HART-4X8 | HART Communication Board |
HiACA-UNI-FLK34-FLK34-0M5 | HART Connection Cable |
HiACA-UNI-FLK34-FLK34-2M0 | HART Connection Cable |
HiACA-UNI-FLK34-FLK34-3M0 | HART Connection Cable |
HiACA-UNI-FLK34-FLK34-6M0 | HART Connection Cable |
HISHPSM/32/MM-01 | HART Termination Board |