SMART Transmitter Power Supply HiD2025ES

• 1-channel isolated barrier
• 24 V DC supply (bus powered)
• Input for 2-wire SMART transmitters and current sources
• Output for 4 mA ... 20 mA or 1 V ... 5 V
• Sink or source mode
• Line fault detection (LFD)
• до SIL3 acc. to IEC 61508

Основные характеристики
Signal type		Analog input
Supply
Подключение		SL1: 1a(-), 1b(-)- 2a(+), 2b(+)
Rated voltage		19 ... 30 V DC via Termination Board
Ripple		&le- 10 %
Rated current		&le- 50 mA
Power loss		&le- 800 mW
Потребляемая мощность		&le- 1.2 W
Вход
Подключение		SL2: 5a(+), 1b(-)- 5a(+), 5b(-)
Input signal		4 ... 20 mA , limited to приблизительно 27 mA защита от обратной полярности
Line fault detection		downscaling &le- 3 mA - upscaling &ge- 22 mA
Падение напряжения		приблизительно 5 V on SL2: 5a(+), 1b(-)
Available voltage		&ge- 15 V at 20 mA on SL2: 5a(+), 5b(-)
Выход
Подключение		SL1: 8a(+), 7a(-)
Load		0 ... 300 &Omega- (source mode)
Output signal		4 ... 20 mA or 1 ... 5 V (on 250 &Omega-, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 16 ... 28 V
Ripple		20 mV rms
Error message output
Подключение		SL1: 6b
Тип выхода		open collector transistor (internal fault bus)
Transfer characteristics
Deviation		at 20 °C (68 °F) &le- ±- 20 µ-A incl. calibration, linearity, hysteresis, loads and supply voltage fluctuations (source mode and sink mode 4 ... 20 mA) &le- 10 mV incl. calibration, linearity, hysteresis and fluctuations of supply voltage (source mode 1 ... 5 V)
Frequency range		field side into the control side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
Соответствие директивам
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Стандарты защищенности		IEC 60529
Условия окружающей среды
Рабочая температура окружающей среды		-20 ... 70 °C (-4 ... 158 °F)
Физические/механические параметры
Стандарты защищенности		IP20
Масса		приблизительно 140 g
Dimensions		18 x 106 x 128 mm (0.7 x 4.2 x 5 in)
Mounting		on Termination Board
Data for application in connection with Ex-areas
EC-Type Examination Certificate		CESI 10 ATEX 063 , for additional certificates see www.pepperl-fuchs.com
	Group, category, type of protection	II (1)GD [Ex ia] IIC, [Ex iaD] [circuit(s) in zone 0/1/2/20/21/22] I (M1) [Ex ia] I
Statement of conformity		PF 10 CERT 1748 X , observe statement of conformity
	Group, category, type of protection, temperature class	II 3G Ex nA II T4
Соответствие директивам
	Directive 94/9/EC	EN 60079-0, EN 60079-11, EN 60079-15, EN 60079-26, EN 61241-0, EN 61241-11
International Сертификаты
IECEx approval		IECEx CES 10.0021

Написать отзыв о SMART Transmitter Power Supply HiD2025ES