SMART Transmitter Power Supply/Current Driver HiD2024

• 4-channel isolated barrier
• 24 V DC supply (bus powered)
• Analog in or analog out signals
• Sink and source mode outputs
• SMART pass-through

Основные характеристики
Signal type		Analog input
Supply
Подключение		SL1: 1a(-), 1b(-)- 2a(+), 2b(+)
Rated voltage		20.4 ... 30 V DC via Termination Board
Ripple		&le- 10 %
Rated current		140 mA at 24 V and 20 mA
Power loss		&le- 1.8 W at 20 mA
Потребляемая мощность		&le- 3.3 W at 20 mA
Hazardous area connection
Подключение		SL2: 5a(+), 5b(-)- 1a(+), 1b(-)- 3a(+), 3b(-)- 7a(+), 7b(-)
Input signal		4 ... 20 mA , limited to приблизительно 30 mA
Available voltage		&ge- 15 V at 20 mA
Output signal		4 ... 20 mA
Output load		0 ... 650 &Omega-
Safe area connection
Подключение		SL1: 8a(+), 7a(-)- 10a(+), 9a(-)- 9b(+), 10b(-)- 8b(+), 7b(-)
Input signal		4 ... 20 mA
Падение напряжения		приблизительно 6 V or internal resistance 300 &Omega- at 20 mA
Output signal		4 ... 20 mA or 1 ... 5 V (on 250 &Omega-, 0.1 % internal shunt) 4 ... 20 mA (sink mode), operating voltage 15 ... 26 V
Output load		0 ... 300 &Omega- (source mode)
Ripple		20 mV rms
Transfer characteristics
Deviation		at 20 °C (68 °F) &le- ±- 0.1 % incl. non-linearity and hysteresis (source mode 4 ... 20 mA) &le- ±- 0.2 % incl. non-linearity and hysteresis (sink mode 4 ... 20 mA) &le- ±- 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V) &le- ±- 0.2 % incl. non-linearity and hysteresis (Аналоговый выход mode 4 ... 20 mA)
Frequency range		field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
Rise time		10 to 90 % &le- 20 ms
Соответствие директивам
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Стандарты защищенности		IEC 60529
Условия окружающей среды
Рабочая температура окружающей среды		-20 ... 60 °C (-4 ... 140 °F)
Физические/механические параметры
Стандарты защищенности		IP20
Масса		приблизительно 140 g
Dimensions		18 x 106 x 128 mm (0.7 x 4.2 x 5 in)
Mounting		on Termination Board
Data for application in connection with Ex-areas
EC-Type Examination Certificate		CESI 02 ATEX 086 , for additional certificates see www.pepperl-fuchs.com
	Group, category, type of protection	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC
Statement of conformity		PF 11 CERT 2109 X , observe statement of conformity
	Group, category, type of protection, temperature class	II 3G Ex nA IIC T4 Gc
Соответствие директивам
	Directive 94/9/EC	EN 60079-0:2009, EN 60079-11:2007, EN60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006

Написать отзыв о SMART Transmitter Power Supply/Current Driver HiD2024