OLM200, PROFIBUS DP-V0 Sick OLM200-1052 (1051659)

Linear measurement sensors
OLM200, PROFIBUS DP-V0   Model Name OLM200-1052 Part No. 1051659   Самое главное Control marks for special functions and sensor configuration Measurement range up to 10 km Adjustable resolution as low as 0.1 mm Maximum speed of 10 m/s Output of position and speed data, as well as service diagnostics via PROFIBUS or Ethernet based fieldbuses Compatible to SPEEDCON™ connectors and standard M12 connectors Large temperature range from -30 °C to +60 °C Преимущества Precise positioning with speeds of up to 10 m/s significantly increases throughput Camera-based system with no moving parts in combination with tough metal housing ensure increased lifetime and availability High ambient light safety due to self-adjusting LED illumination ensures reliable operation, thus increasing machine availability Large temperature range from -30 °C to +60 °C offers flexible and reliable use in many applications Status bit for pre-failure and preventive maintenance information eliminates unpredicted machine downtimes Single direction alignment, red lighting and compatibility to SPEEDCON™ connectors enable fast mounting, thus saving installation time and costs PROFIBUS interface enables a flexible and high performance system implementation

Performance
	Resolution:	, 0.1 mm, 1 mm, 10 mm, 100 mm
	Repeatability 1):	0.15 mm
	Response time 2):	≥- 10 ms
	Output rate:	2.5 ms
	Light source:	LED, red
	Measurement range 3):	0 m ... 10,000 m
	Service life 4):	100,000 h
	Bar code width 5):	40 mm
	MTTFd:	> 100 years
	Sensing distance:	130 mm, ± 20 mm (to bar code tape, 40 mm bar code width)
	Max. movement speed:	10 m/s
	Accuracy of speed output:	± 5 mm/s

1) Statistical error 3 ?, no warm-up time required  2) Response time of switching output  3) Dependant on the set resolution and transfer protocol  4) LED typ. MTTF at 25°C  5) The bar code tape available from SICK always has a width of 30 mm. The bar code tape is available in two heights: 30 mm or 40 mm

Interfaces
	Data interface:	PROFIBUS DP-V0
	Maximum baudrate:	12 Baud
	Switching output 1):	MF1: PNP MF1: NPN
	Data transmission rate:	3 Mbit/s

1) Functions of switching output MF1 PNP/MF1 NPN: position, speed, control mark Q00 (off), Q01 (on), illumination on/off, service [prefailure (dirt/LED life time), no bar code tape, over/under temperature, out of range 0 km > position > 10 km, internal error]

Mechanics/electronics
	Output current IA 1):	100 mA
	Supply voltage Vs 2):	DC 18 V ... 30 V
	Residual ripple 3):	≤- 5 Vpp
	Power consumption:	< 5.5 W
	Initialization time:	3 s
	Housing material:	Aluminum zinc
	Weight:	Ca. 510 g

1) Switching outputs MF1 short-circuit protected  2) Limit values, reverse-polarity protected  3) May not exceed or fall short of VS tolerances

Ambient data
	Enclosure rating:	IP 65 (EN 60 529)
	Protection class:	III
	EMC:	EN 61000-6-2 EN 61000-6-4
	Ambient temperature 1) 2):	Operation: -30 ... 60 °C, Storage: -40 ... 75 °C
	Typ. ambient light safety 3):	≤- 30,000 lx
	Vibration resistance:	DIN/EN 60068-2-6, DIN/EN 60068-2-64
	Shock resistance:	DIN/EN 60068-2-27

1) Temperatures < -20 °C with 5 min warm up time  2) Max. 95 % humidity, non-condensing  3) Typ. value at +25 °C ambient temperature

*изображение на сайте может отличаться от реального

Написать отзыв о OLM200, PROFIBUS DP-V0 Sick OLM200-1052 (1051659)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: