OLM200, PROFIBUS DP-V0 Sick OLM200-1002 (1051658)

OLM200, PROFIBUS DP-V0 Sick OLM200-1002 (1051658)
Производитель: Sick
Артикул: 1051658
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Linear measurement sensors
OLM200, PROFIBUS DP-V0
 
Model NameOLM200-1002
Part No.1051658
 

Самое главное

  • Control marks for special functions and sensor configuration
  • Measurement range up to 10 km
  • Adjustable resolution as low as 0.1 mm
  • Maximum speed of 10 m/s
  • Output of position and speed data, as well as service diagnostics via PROFIBUS or Ethernet based fieldbuses
  • Compatible to SPEEDCON™ connectors and standard M12 connectors
  • Large temperature range from -30 °C to +60 °C

    Преимущества

  • Precise positioning with speeds of up to 10 m/s significantly increases throughput
  • Camera-based system with no moving parts in combination with tough metal housing ensure increased lifetime and availability
  • High ambient light safety due to self-adjusting LED illumination ensures reliable operation, thus increasing machine availability
  • Large temperature range from -30 °C to +60 °C offers flexible and reliable use in many applications
  • Status bit for pre-failure and preventive maintenance information eliminates unpredicted machine downtimes
  • Single direction alignment, red lighting and compatibility to SPEEDCON™ connectors enable fast mounting, thus saving installation time and costs
  • PROFIBUS interface enables a flexible and high performance system implementation
     
     
           

    Performance
    Resolution:, 0.1 mm, 1 mm, 10 mm, 100 mm
    Repeatability 1):0.15 mm
    Response time 2):≥- 10 ms
    Output rate:2.5 ms
    Light source:LED, red
    Measurement range 3):0 m ... 10,000 m
    Service life 4):100,000 h
    Bar code width 5):30 mm
    MTTFd:> 100 years
    Sensing distance:100 mm, ± 20 mm (to bar code tape, 30 mm bar code width)
    Max. movement speed:10 m/s
    Accuracy of speed output:± 5 mm/s
    1) Statistical error 3 ?, no warm-up time required  2) Response time of switching output  3) Dependant on the set resolution and transfer protocol  4) LED typ. MTTF at 25°C  5) The bar code tape available from SICK always has a width of 30 mm. The bar code tape is available in two heights: 30 mm or 40 mm  


    Interfaces
    Data interface:PROFIBUS DP-V0
    Maximum baudrate:12 Baud
    Switching output 1):Multifunctional output MF1: PNP
    Multifunctional output MF1: NPN
    Data transmission rate:3 Mbit/s
    1) Functions of switching output MF1 PNP/MF1 NPN: position, speed, control mark Q00 (off), Q01 (on), illumination on/off, service [prefailure (dirt/LED life time), no bar code tape, over/under temperature, out of range 0 km > position > 10 km, internal error]  


    Mechanics/electronics
    Output current IA 1):100 mA
    Supply voltage Vs 2):DC 18 V ... 30 V
    Residual ripple 3):≤- 5 Vpp
    Power consumption:< 5.5 W
    Initialization time:3 s
    Housing material:Aluminum
    zinc
    Weight:Ca. 510 g
    1) Switching outputs MF1 short-circuit protected  2) Limit values, reverse-polarity protected  3) May not exceed or fall short of VS tolerances  


    Ambient data
    Enclosure rating:IP 65 (EN 60 529)
    Protection class:III
    EMC:EN 61000-6-2 EN 61000-6-4
    Ambient temperature 1) 2):Operation: -30 ... 60 °C, Storage: -40 ... 75 °C
    Typ. ambient light safety 3):≤- 30,000 lx
    Vibration resistance:DIN/EN 60068-2-6, DIN/EN 60068-2-64
    Shock resistance:DIN/EN 60068-2-27
    1) Temperatures < -20 °C with 5 min warm up time  2) Max. 95 % humidity, non-condensing  3) Typ. value at +25 °C ambient temperature  



    *изображение на сайте может отличаться от реального
    Нет отзывов об этом товаре.

    Написать отзыв о OLM200, PROFIBUS DP-V0 Sick OLM200-1002 (1051658)

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке: