Пром. автоматизация
» » » » »

Flow speed measuring device Sick FLOWSIC200 (FLOWSIC200)

Flow speed measuring device Sick FLOWSIC200 (FLOWSIC200)
Производитель: Sick
Артикул: FLOWSIC200
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Tunnel Sensors
Flow speed measuring device
 
Model NameFLOWSIC200
 

The FLOWSIC200 is used for the contact-free and accurate measurement of flow velocity and flow direction inside tunnels or exhaust ventilation ducts. Ultrasonic technology provides the cross-sectional mean average value of the flow velocity. This device is used for measurement necessary for optimal ventilation control and reducing running costs to a minimum when air flow is dictated by climatic conditions or by traffic.

In case of fires in tunnels the accurate, reliable and representative measurement of air velocity and direction across the tunnel is mandatory. This is the only way to check reliably the smoke propagation and to achieve the necessary information for optimal control of the ventilation system.

Самое главное

  		• Very large measuring distance possible
  		• Contact-free measurement
  		• Extremely rugged compounds made of titanium, stainless steel or die cast
  		• Versions for very corrosive atmospheres
  		• Determination of flow direction
  		• No mechanically moving parts

    Преимущества

  		• Representative measurement across total tunnel width
  		• Very reliable measurement, compared with punctual measurement methods
  		• Accurate measurement of low flow velocities
  		• Long maintenance intervals up to 5 years
  		• Low operational costs due to reliable operation and low maintenance
  		• High availability of devices and therefore also of measurement data

    Fields of application

  		• Measurement in road and railway tunnels
  		• For control of tunnel ventilation
  		• For detection of smoke propagation
     

    Technical data
    Measuring principle:Ultrasonic propagation time delay measurement
    Measuring ranges:Flow velocity: -20 ... 20 m/s
    Remark:Continuously adjustable
    Measuring paths:5 ... 40 m
    depending on device type- larger measuring paths on request
    Ambient temperature:-40 ... 60 °C
    Ambient humidity:0 ... 100 %
    relative humidity
    Conformities:ASTRA "Guideline - Ventilation of Road Tunnels" (2004, V1.2), RABT 2006, RSV 09.02.22
    Electrical safety:CE
    Enclosure rating:Sender/receiver units: IP 66, MCU control unit: IP 65
    Analogue outputs:1 output:
    0/2/4 ... 22 mA, 750 Ω-
    additional outputs if using I/O modules
    Analogue inputs:2 inputs:
    0 ... 20 mA , 0 ... 10 V
    additional inputs if using I/O modules
    Digital outputs:5 outputs:
    120 V AC, 1 A 30 V DC, 2 A
    floating- for status signals- extendible by additional I/O modules
    Digital inputs:4 inputs
    for connection of floating contacts- extendible by additional I/O modules
    Interfaces:RS-232, RS-485 (option), USB (service interface)
    Bus protocol:Ethernet TCP/IP (option), MODBUS (on request), PROFIBUS-DP (option)
    Operation:Via LC-display or software SOPAS ET
    Device types:Aluminium cast housing, Stainless steel housing
    System components:Connection box, Sender/receiver units, MCU control unit
    Test functions:Internal zero and reference point check
    Mounting:Typical hight above lane: 4,2 m- 45° ... 60° to tunnel axis
    Note:The scope of delivery depends on application and customer specifications.



    *изображение на сайте может отличаться от реального
    Нет отзывов об этом товаре.

    Написать отзыв о Flow speed measuring device Sick FLOWSIC200 (FLOWSIC200)

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке:



    Отправить