KT10, KT10-2 Sick KT10W-2P2115 (1029070)

Contrast sensors
KT10, KT10-2   Model Name KT10W-2P2115 Part No. 1029070   Самое главное Very low jitter (< 10 µs) Precise light spot Maximum detection reliability due to 3-color RGB LED technology Two interchangeable light exits Five storage banks for settings Automatic drift correction Fast switching frequency of 25 kHz Easy-to-read bar graph display Преимущества Precise detection of print marks enables optimal results for packaging and printing applications All contrast marks, even pale yellow on white paper, can be reliably detected due to RGB LED technology Automatic drift correction helps detect difficult-to-see marks, such as faded print marks, enabling higher production reliability Reliable operation, even with high-gloss reflective surfaces, increases throughput Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time Long-lasting, tough metal housing

Features
	Dimensions (L x W x H):	80 mm x 30.4 mm x 53 mm
	Sensing distance 1):	10 mm
	Sensing distance tolerance:	± 3 mm
	Light source 2) 3):	LED red, green, blue
	Light emission:	Long and short side of housing, exchangeable
	Light spot size:	0.8 mm x 4 mm
	Light spot direction 4):	Horizontal
	Adjustment:	Static 2-point teach-in, Dynamic teach-in (min/max)
	Function:	Automatic drift correction

1) From front edge of lens  2) Average service life of 100,000 h at TA = +25 °C  3) Wave length: 470 nm, 525 nm, 640 nm  4) In relation to long side of housing

Mechanics/electronics
	Supply voltage Vs 1):	DC 10 V ... 30 V
	Residual ripple 2):	≤- 5 Vpp
	Power consumption 3):	< 120 mA
	Switching frequency 4):	25 kHz
	Response time 5):	20 µs
	Jitter:	< 10 µs
	Switching output:	PNP: HIGH = VS- ≤- 2 V / LOW approx. 0 V
	Switching output:	PNP
	Input, teach-in (ET):	PNP: Teach: U = 10 V ... < UV Run: U < 2 V
	Input, blanking input (AT) 6):	PNP: blanked: U > 10 V ... < Uv free-running: U < 2 V
	Retention time (ET):	25 ms, non-volatile memory
	Time delay:	20 ms, adjustable
	Connection type:	Connector M12, 5-pin
	Protection class 7):	II
	Circuit protection:	Output Q short-circuit protected, Outputs overcurrent and short-circuit protected, Interference suppression, VS connections reverse-polarity protected
	Enclosure rating:	IP 67
	Weight:	Ca. 400 g
	Housing material:	Die-cast zinc
	Output current Imax.:	100 mA

1) Limit values: operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS tolerances  3) Without load  4) With light/dark ratio 1:1  5) Signal transit time with resistive load  6) AT > 200 µs  7) Reference voltage DC 50 V

Ambient data
	Ambient temperature:	Operation: -10 ... 55 °C Storage: -10 ... 75 °C
	Shock load:	According to IEC 60068

*изображение на сайте может отличаться от реального

Написать отзыв о KT10, KT10-2 Sick KT10W-2P2115 (1029070)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: