KT10, KT10 Sick KTL10W-P15 (1023419)

Contrast sensors
KT10, KT10   Model Name KTL10W-P15 Part No. 1023419   Самое главное Very low jitter (< 10 µs) Precise light spot Best contrast resolution thanks to RGB LED technology Two interchangeable light exits Five storage banks for settings Automatic drift correction Fast switching frequency of 25 kHz Easy-to-read bar graph display Преимущества Very precise detection of print marks enables optimal results for packaging and printing applications All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability Reliable operation, even with high-gloss reflective surfaces, increasing throughput Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time Long-lasting, tough metal housing

Features
	Dimensions (L x W x H):	80 mm x 30.4 mm x 53 mm
	Sensing distance:	Dependent on the fiber-optic cablethe fiber-optic cable
	Sensing distance tolerance:	Dependent on the fiber-optic cablethe fiber-optic cable
	Light source 1):	LED red, green, blue
	Light spot size:	Dependent on the fiber-optic cable
	Adjustment:	Dynamic teach-in (min/max)
	Function:	Deactivation delay ... 20 ms

1) Wave length: 470 nm, 525 nm, 640 nm

Mechanics/electronics
	Supply voltage Vs 1):	DC 12 V ... 30 V
	Residual ripple 2):	≤- 5 Vpp
	Power consumption 3):	< 150 mA
	Switching frequency 4):	25 kHz
	Response time 5):	20 µs
	Jitter:	< 10 µs
	Switching output:	PNP: HIGH = VS- ≤- 2 V / LOW approx. 0 V
	Switching output:	PNP
	Input, teach-in (ET) 6):	PNP: Teach: U = 10 V ... < UV Run: U < 2 V
	Input, blanking input (AT) 7):	PNP: blanked: U > 10 V ... < Uv free-running: U < 2 V
	Retention time (ET):	25 ms, non-volatile memory
	Connection type:	Connector M12, 5-pin
	Protection class 8):	II
	Circuit protection:	Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
	Enclosure rating:	IP 67
	Weight:	Ca. 400 g
	Housing material:	Die-cast zinc
	Output current Imax.:	100 mA

1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) With light/dark ratio 1:1  5) Signal transit time with resistive load  6) ET > 2 ms  7) AT > 200 µs  8) Reference voltage DC 50 V

Ambient data
	Ambient temperature:	Operation: -10 ... 60 °C Storage: -10 ... 75 °C
	Shock load:	According to IEC 60068

*изображение на сайте может отличаться от реального

Написать отзыв о KT10, KT10 Sick KTL10W-P15 (1023419)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: