LUT3, LUT3-9 Sick LUT3-910 (1019285)
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
| Luminescence sensors | ||||||||||||||||
|
| |||||||||||||||
| Features | |||
| Dimensions (L x W x H): | 80 mm x 30.4 mm x 53 mm | ||
| Sensing distance 1): | 10 mm | ||
| Light source 2) 3): | UV-LED | ||
| Light spot size: | 2 mm x 6 mm | ||
| Receiving filters: | KV 418 (standard) | ||
| Receiving range: | 450 nm ... 750 nm | ||
| Adjustment: | Manual (potentiometer) | ||
| Switching mode: | Light switching | ||
| 1) From front edge of lens 2) Average service life of 100,000 h at TA = +25 °C 3) Wave length: 375 nm |
| Mechanics/electronics | |||
| Supply voltage Vs 1): | DC 12 V ... 30 V | ||
| Residual ripple 2): | < 2 Vpp | ||
| Power consumption 3): | < 60 mA | ||
| Switching frequency 4): | 1.5 kHz | ||
| Response time 5): | 350 µs | ||
| Switching output: | PNP: HIGH = VS- ≤- 3 V / LOW = approx. 0 V NPN: HIGH = approx. VS / LOW ≤- 2 V | ||
| Switching output: | PNP/NPN | ||
| Output current Imax.: | 100 mA | ||
| Connection type: | Connector M12, 5-pin | ||
| Protection class 6): | II | ||
| Circuit protection: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected | ||
| Enclosure rating: | IP 67 | ||
| Weight: | Ca. 400 g | ||
| Housing material: | Zinc diecast | ||
| 1) Limit values: operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) Reference voltage DC 50 V |
| Ambient data | |||
| Ambient temperature: | Operation: -10 ... 55 °C Storage: -25 ... 75 °C | ||
| Shock load: | According to IEC 60068 | ||
Нет отзывов об этом товаре.
Написать отзыв о LUT3, LUT3-9 Sick LUT3-910 (1019285)
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: