KT10, KT10 Sick KT10W-N1115 (1016192)

Производитель: Sick
Артикул: 1016192
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Contrast sensors
KT10, KT10
 
Model NameKT10W-N1115
Part No.1016192
 

Самое главное

  • Very low jitter (< 10 µs)
  • Precise light spot
  • Best contrast resolution thanks to RGB LED technology
  • Two interchangeable light exits
  • Five storage banks for settings
  • Automatic drift correction
  • Fast switching frequency of 25 kHz
  • Easy-to-read bar graph display

    Преимущества

  • Very precise detection of print marks enables optimal results for packaging and printing applications
  • All contrast marks, even pale yellow on white paper, can be reliably detected thanks to RGB LED technology
  • Automatic drift correction helps detect difficult to see marks, such as faded print marks, enabling higher production reliability
  • Reliable operation, even with high-gloss reflective surfaces, increasing throughput
  • Simple teach-in via an external signal can be performed while the material is moving, enabling shorter setup time
  • Long-lasting, tough metal housing
     
         
     
     

    Features
    Dimensions (L x W x H):80 mm x 30.4 mm x 53 mm
    Sensing distance 1):12.5 mm
    Sensing distance tolerance:± 2 mm
    Light source 2) 3):LED red, green, blue
    Light emission:Short side of housing
    Light spot size:0.8 mm x 4 mm
    Light spot direction 4):Vertical
    Adjustment:Dynamic teach-in (min/max)
    Function:Deactivation delay ... 20 ms
    1) From front edge of lens  2) Average service life of 100,000 h at TA = +25 °C  3) Wave length: 470 nm, 525 nm, 640 nm  4) In relation to long side of housing  


    Mechanics/electronics
    Supply voltage Vs 1):DC 12 V ... 30 V
    Residual ripple 2):≤- 5 Vpp
    Power consumption 3):< 150 mA
    Switching frequency 4):25 kHz
    Response time 5):20 µs
    Jitter:< 10 µs
    Switching output:NPN: HIGH = approx. VS / LOW ≤- 2 V
    Switching output:NPN
    Input, teach-in (ET) 6):NPN:
    Teach: U < 2 V
    Run: U = 10 V ... < UV
    Input, blanking input (AT) 7):NPN:
    blanked: U < 2 V
    free-running: U > 10 V ... < Uv
    Retention time (ET):25 ms, non-volatile memory
    Connection type:Connector M12, 5-pin
    Protection class 8):II
    Circuit protection:Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected
    Enclosure rating:IP 67
    Weight:Ca. 400 g
    Housing material:Die-cast zinc
    Output current Imax.:100 mA
    1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) With light/dark ratio 1:1  5) Signal transit time with resistive load  6) ET > 2 ms  7) AT > 200 µs  8) Reference voltage DC 50 V  


    Ambient data
    Ambient temperature:Operation: -10 ... 60 °C
    Storage: -10 ... 75 °C
    Shock load:According to IEC 60068



    *изображение на сайте может отличаться от реального
    Нет отзывов об этом товаре.

    Написать отзыв о KT10, KT10 Sick KT10W-N1115 (1016192)

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке: