Ничего не куплено!
Contrast sensors | ||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||
Features | |||
Dimensions (L x W x H): | 41.5 mm x 15 mm x 49 mm | ||
Sensing distance: | 13.5 mm | ||
Sensing distance tolerance: | ± 2 mm | ||
Light source 1) 2): | LED red | ||
Light spot size: | O 2 mm | ||
Adjustment: | Manual adjustment, potentiometer | ||
Switching mode: | Light/dark switching |
1) Average service life of 100,000 h at TA = +25 °C 2) Wave length: 660 nm |
Mechanics/electronics | |||
Supply voltage Vs 1): | DC 10 V ... 30 V | ||
Residual ripple 2): | ≤- 5 Vpp | ||
Power consumption 3): | < 80 mA | ||
Switching frequency 4): | 10 kHz | ||
Response time 5): | 50 µs | ||
Switching output: | PNP: HIGH = VS- ≤- 3 V / LOW = approx. 0 V NPN: HIGH = approx. VS / LOW ≤- 1.5 V | ||
Switching output: | PNP NPN | ||
Input, light/dark (L/D): | NPN: light: U = UV dark: U = 0 V, PNP: light: U = 0 V dark: U = 10 V ... < UV | ||
Time delay: | 20 ms | ||
Connection type: | Connector M12, 5-pin | ||
Protection class 6): | II | ||
Circuit protection: | Output Q short-circuit protected, Interference suppression, VS connections reverse-polarity protected | ||
Enclosure rating: | IP 67 | ||
Weight: | Ca. 120 g | ||
Housing material: | Zinc diecast | ||
Output current Imax.: | 100 mA |
1) Limit values: operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) With light/dark ratio 1:1 5) Signal transit time with resistive load 6) Reference voltage DC 50 V |
Ambient data | |||
Ambient temperature: | Operation: -10 ... 55 °C Storage: -20 ... 75 °C | ||
Shock load: | According to IEC 60068 |