Safety switching amplifier Sick UE403-A0930 (1026287)
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
| Switching amplifiers | |||||||||||||||
| |||||||||||||||
| Functions | |||
| Muting (with M4000 Advanced, M4000 A/P): | Yes | ||
| Concurrence monitoring (with M4000 Advanced, A/P): | Yes | ||
| Override (with M4000 Advanced, A/P): | Yes | ||
| Monitoring total muting time (with M4000 Advanced, A/P): | Yes | ||
| Sensor gap monitoring (with M4000 Advanced, A/P): | Yes | ||
| Sensor test (with M4000 Advanced, A/P): | Yes | ||
| Partial blanking (with M4000 Advanced, A/P): | Yes | ||
| End of muting by ESPE (with M4000 Advanced, A/P): | Yes | ||
| Belt stop (with M4000 Advanced, A/P): | Yes | ||
| Number of muting sensors: | 4 | ||
| Connection muting lamp: | Yes | ||
| Connection belt stop signal: | Yes | ||
| Connection additional signal C1: | Yes | ||
| Connection reset control switch: | Yes | ||
| Connection override control switch: | Yes | ||
| Technical data | |||
| Protection class: | III (EN 50178:1998) | ||
| Enclosure rating: | IP 65 (IEC 60529) | ||
| Safety integrity level: | SIL3 (IEC 61508), SILCL3 (IEC 62061) 1) | ||
| Category: | Category 4 (EN ISO 13849) 2) | ||
| Performance level: | PL e (EN ISO 13849) 3) | ||
| PFHd: | 1.0 * 1E-08 4) | ||
| TM (mission time): | 18 a 5) | ||
| Dimensions (W x H x D): | 76.5 mm x 225.2 mm x 40 mm | ||
| Supply voltage from, typical, to: | 19.2 V DC, 24 V DC, 28.8 V DC | ||
| Maximum power consumption: | 2 | ||
| Type of muting sensors: | inductive sensors, mechanical switches, Optical sensors, controller signals | ||
| Connection type: | Socket M12 x 5 | ||
| Switching voltage HIGH inputs from, typical, to: | 11 V DC, 24 V DC, 30 V DC | ||
| Input current HIGH from, typical, to: | 6 mA, 10 mA, 15 mA | ||
| Switching voltage LOW inputs from, typical, to: | -30 V DC, 0 V DC, 5 V DC | ||
| Input current LOW from, typical, to: | -0.5 mA, 0 mA, 1.5 mA | ||
| Supply voltage outputs from, typical, to: | 15 V DC, 24 V DC, 28.8 V DC | ||
| Supply current outputs for muting sensors: | 400 mA 6) | ||
| Supply current outputs for reset, override or C1: | 500 mA 7) | ||
| Switching voltage HIGH output, muting lamp, from, typical, t: | 15 V DC, 24 V DC, 28.8 V DC | ||
| Output current HIGH (monitored), muting lamp, from, to: | Monitored, 20 mA, 400 mA 8) | ||
| Output current HIGH (not monitored), muting lamp, from, to: | Not monitored, 0 mA, 400 mA 9) | ||
| Maximum output power HIGH, muting lamp: | 5 W | ||
| Maximum cable length to ESPE: | 10 m | ||
| Minimum conductor cross-section: | 0.34 mm? | ||
| Wire cross section from ... to: | 0.34 mm? | ||
| Maximum cable resistance: | < 0.5 Ω- (per cable) | ||
| Ambient operating temperature from ... to: | -10 °C ... 55 °C | ||
| Storage temperature from ... to: | -25 °C ... 70 °C | ||
| Air humidity from ... to: | 15 % ... 95 %, non-condensing | ||
| Vibration resistance (checked to): | 5 (IEC 60068-2-6) | ||
| Oscillation frequency from ... to: | 10 ... 55 | ||
| Shock resistance: | 10 g, 16 ms (IEC 60068-2-29) | ||
| Housing material: | Die-cast aluminum (powder coated) | ||
| Material, connector strip: | Polyamide | ||
| Mounting: | flexible mounting to the M4000 Advanced or directly in the system | ||
| System part: | Safety relays | ||
| 1) 2) 3) 4) 5) Only in conjunction with M4000 Advanced or M4000 Advanced A/P 6) 7) Total of all supply currents from the connections RES/OVR, A1, A2, B1 and B2 (pin 1 in each case): max. 1000 mA 8) 9) At max. 5 W power consumption |
Нет отзывов об этом товаре.
Написать отзыв о Safety switching amplifier Sick UE403-A0930 (1026287)
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: