W8 Inox, Photoelectric proximity sensor, energetic Sick WTE8-P3331V (6041476)

Photoelectric sensors
W8 Inox, Photoelectric proximity sensor, energetic   Model Name WTE8-P3331V Part No. 6041476   Самое главное Rugged IP 69K stainless steel housing 1.4404/316L Front screen made of high-performance PPSU plastic that is resistant to heat and chemicals Potentiometer made of mechanically stable, high-performance PEEK plastic Constructed from FDA-approved materials Well-defined, highly visible light spot M3 threaded mounting holes and stainless steel mounting bracket (1.4301/304) included with delivery Преимущества High reliability due to an IP 69K stainless steel housing, which withstands aggressive cleaning agents or cooling lubricants Quick and easy mounting due to universally compatible M3 threaded mounting holes Compact housing saves space (equal to W8 plastic version) Highly visible light spot provides easy alignment All necessary accessories are included, which simplifies installation

Features
	Dimensions (W x H x D):	11 mm x 21 mm x 33.3 mm
	Sensing range max.:	0 mm ... 950 mm 1)
	Sensing range:	0 mm ... 700 mm 2)
	Housing design (light emission):	Rectangular
	Light source:	LED 3)
	Type of light:	Visible red light
	Wave length:	645 nm
	Adjustment of operating distance:	Potentiometer, 270°
	Sensor/detection principle:	Photoelectric proximity sensor, energetic
	Light spot (distance):	35 mm (700 mm)

1) 2) Object with 90 % reflectance (referred to standard white DIN 5033)  3) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 69K
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	± 10 % 2)
	Power consumption:	≤- 30 mA 3)
	Switching output:	PNP, Light/dark-switching, selectable via light/dark selector
	Output current Imax.:	100 mA
	Response time:	≤- 0.5 ms 4)
	Switching frequency:	1,000 Hz 5)
	Connection type:	Cable with plug, M12, 4-pin, 300 mm 6)
	Cable material:	PVC
	Conductor cross-section:	0.18 mm?
	Protection class:	III
	Circuit protection:	A, B, D 7) 8) 9)
	Weight:	83.6 g
	Housing material:	Stainless steel V4A (1.4404, 316L)
	Ambient operating temperature:	-30 °C ... 60 °C 10)
	Ambient storage temperature:	-40 °C ... 70 °C
	Items supplied:	Stainless steel mounting bracket (1.4301/304) BEF-W100-A
	Signal voltage PNP HIGH / LOW:	Approx. VS - 1.8 V / 0 V
	Angle of dispersion:	3 °
	UL File-No.:	FDA

1) Limit values, reverse-polarity protected operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS tolerances  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) Do not bend below 0 °C  7) A = VS connections reverse-polarity protected  8) B = inputs and output reverse-polarity protected  9) D = outputs overcurrent and short-circuit protected  10) At an air humidity of 35 ... 95 %

*изображение на сайте может отличаться от реального

Написать отзыв о W8 Inox, Photoelectric proximity sensor, energetic Sick WTE8..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: