W4S-3, Through-beam photoelectric sensor Sick WSE4S-3P2130 (1052892)

Photoelectric sensors
W4S-3, Through-beam photoelectric sensor   Model Name WSE4S-3P2130 Part No. 1052892   Самое главное Best background suppression sensor in its class Photoelectric retro-reflective sensor for transparent objects reliably detects all known objects Universal use of PinPoint LED technology in all models BGS proximity sensor with laser-like light spot for precise detection tasks Reliable setting via 5-turn potentiometer, teach-in pushbutton, teach-in via cable or IO-Link Преимущества Application versatility due to reliable detection of shiny, transparent or jet-black objects IO-Link or teach-in pushbuttons enable sensors to be quickly commissioned Very quick and easy alignment due to the highly visible, intense PinPoint LED light spot Rugged mounting system with M3 threaded metal inserts reduces maintenace costs due to a long service life Background suppression sensors with a laser-like light spot reduce costs and installation of additional protective measures by replacing laser sensors

Features
	Dimensions (W x H x D):	16 mm x 39.5 mm x 12 mm
	Sensing range max.:	0 m ... 5 m
	Sensing range:	0 m ... 4.5 m
	Housing design (light emission):	Rectangular, Slim
	Light source:	PinPoint LED 1)
	Type of light:	Visible red light
	Wave length:	650 nm
	Sensor/detection principle:	Through-beam photoelectric sensor
	Light spot (distance):	O 50 mm (2 m)

1) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 67 IP 66
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	< 5 Vpp 2)
	Power consumption:	≤- 20 mA ≤- 20 mA ≤- 20 mA 3) 4) 5)
	Switching output:	PNP, Light-switching
	Output current Imax.:	≤- 100 mA
	Response time:	0.5 ms 6)
	Switching frequency:	1,000 Hz 7)
	Connection type:	Connector M8, 3-pin
	Protection class:	III
	Circuit protection:	A C D 8) 9) 10)
	Weight:	40 g
	Housing material:	ABS
	Optics material:	PMMA
	Ambient operating temperature:	-40 °C ... 60 °C
	Ambient storage temperature:	-40 °C ... 75 °C
	Test input sender off:	TE to 0 V

1) Limit values  2) May not exceed or fall short of VS tolerances  3) Sender  4) 5) Receiver  6) Signal transit time with resistive load  7) With light/dark ratio 1:1  8) A = VS connections reverse-polarity protected  9) C = interference suppression  10) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о W4S-3, Through-beam photoelectric sensor Sick WSE4S-3P2130 (..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: