Dx100, DL100 Hi, RS-422 Sick DL100-22HA2103 (1052695)

Long range distance sensors
Dx100, DL100 Hi, RS-422   Model Name DL100-22HA2103 Part No. 1052695   Самое главное Measurement range up to 300 m Numerous fieldbus interfaces Pre-failure and diagnostic data available Display with intuitive menu and easy to see status LEDs Small and rugged metal housing 3-axis alignment bracket with quick lock system Elongated holes for precise adjustment of sensor offset SPEEDCON™ and standard M12 electrical connections Преимущества Enhanced closed-loop behavior offers highest performance and productivity Operating temperature down to -40 °C ensures the highest reliability in cold storage warehouses and freezers Numerous fieldbus and Ethernet-based interfaces offer the highest flexibility and fast communication for maximum efficiency Pre-failure and extensive diagnostic data allow for preventive maintenance, ensuring the highest machine uptime Small, rugged metal housing and SpeedCon™ compatible connectors ensure hassle-free installation - even in confined spaces 3-axis alignment bracket ensures fast alignment and easy exchange, reducing maintenance and setup costs Numerous accessories allow flexible use and guarantee high operation functionality

Performance
	Resolution:	0.1 mm, 0.125 mm, 1 mm, 10 mm, 100 mm
	Repeatability 1):	1 mm
	Accuracy:	± 2.5 mm
	Light source 2):	Laser, red
	Laser protection class:	2 (EN 60825-1 / CDRH)
	Typ. light spot size (distance):	5 mm (+ 2 mm x distance in m)
	Output rate:	Synchronous to PLC request
	Measuring range 3):	0.15 m ... 200 m, On reflective tape "Diamond Grade"
	Acceleration (max.):	15 m/s?
	Internal measurement cycle:	1 ms
	Max. movement speed:	10 m/s
	Dead time:	2 ms

1) Statistical error 1 ?, environmental conditions constant, min. warm-up time 10 min  2) Average service life of 100,000 h at TA = +25 °C   3) On reflective tape "Diamond Grade"

Interfaces
	Switching output 1):	Push-pull: PNP/NPN (100 mA) MF1, MF2
	Multifunctional input 2):	1 x MF1
	Data interface:	RS-422

1) HIGH > VS - 3 V / LOW < 2 V  2) HIGH > 12 V / LOW < 3 V

Mechanics/electronics
	Supply voltage Vs:	DC 18 V ... 30 V, limit values
	Residual ripple 1):	< 5 Vpp
	Initialization time 2):	Typ. 1.5 s
	Indication:	6 digit 5 x 7 dot matrix display
	Weight 3):	Ca. 800 g ... 1,600 g
	Output current IA 4):	≤- 100 mA
	Power consumption:	At 24 V DC < 1,000 mA
	Connection type:	Connector M12, SPEEDCON™ compatible
	Housing material:	Aluminum/zinc die-cast

1) May not fall short of or exceed VS tolerances  2) After loss of reflector < 40 ms  3) Without mounting bracket: approx. 800 g, with mounting bracket: approx. 1,600 g  4) Short circuit/overload protected. Max. 100 nF / 20 mH

Ambient data
	Enclosure rating:	IP 65
	Protection class:	III
	EMC 1):	EN 61000-6-2 EN 61000-6-4
	Effect of air pressure:	0.3 ppm/hPa
	Effect of air temperature:	1 ppm/K
	Temperature drift:	Typ. 0.1 mm/K
	Ambient temperature:	Operation with heating: -40 ... 55 °C Operation with cooling case: -40 ... 75 °C Storage: -40 ... 75 °C
	Mechanical load:	Noise: EN 600 68-2-64 Shock: EN 600 68-2-27 Sine: EN 600 68-2-6

1) This is a Class A device. This device can cause radio interference in living quarters.

*изображение на сайте может отличаться от реального

Написать отзыв о Dx100, DL100 Hi, RS-422 Sick DL100-22HA2103 (1052695)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: