W15, Photoelectric retro-reflective sensor Sick WL15-B2230 (1050037)

Photoelectric sensors
W15, Photoelectric retro-reflective sensor   Model Name WL15-B2230 Part No. 1050037   Самое главное Photoelectric retro-reflective sensor in hybrid design with 5 m sensing range Mounting flexibility: M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes Flush mounting possible using the snap ring Transparent back cover Highly visible sender LED Options with an adjustable delay of 0 - 2s Преимущества Compatible with many competitor models, making it easy to install and commission Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections Clearly visible LED indicators reduce setup time and simplify troubleshooting Quick and easy alignment due to highly visible light spot

Features
	Dimensions (W x H x D):	16.2 mm x 45.2 mm x 31.9 mm
	Sensing range max.:	0.035 m ... 5 m 1)
	Sensing range:	0.035 m ... 3.5 m 2)
	Housing design (light emission):	Rectangular cylindrical
	Light source:	LED 3)
	Type of light:	Visible red light
	Wave length:	650 nm
	Thread diameter (housing):	M18 x 1
	Sensor/detection principle:	Photoelectric retro-reflective sensor
	Light spot (distance):	140 mm (3.5 m)

1) 2) PL80A  3) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 67
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	≤- 5 Vpp 2)
	Power consumption:	≤- 30 mA 3)
	Switching output:	PNP, light switching NPN, light switching
	Output current Imax.:	≤- 100 mA
	Response time:	≤- 1.25 ms 4)
	Switching frequency:	400 Hz 5)
	Connection type:	Connector M8, 4-pin
	Protection class:	II 6)
	Circuit protection:	A B D 7) 8) 9)
	Weight:	10 g
	Housing material:	ABS
	Optics material:	PMMA
	Ambient operating temperature:	-25 °C ... 55 °C
	Ambient storage temperature:	-25 °C ... 70 °C
	Polarisation filter:	Yes
	Items supplied:	Snap-ring and M18 nut
	Special device:	-
	Angle of dispersion:	1.5 °

1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) Reference voltage 50 V DC  7) A = VS connections reverse-polarity protected  8) B = inputs and output reverse-polarity protected  9) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о W15, Photoelectric retro-reflective sensor Sick WL15-B2230 (..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: