DML, DML40-2, RS-422 RS-232 Sick DML40-2-1111S01 (1044053)

Long range distance sensors
DML, DML40-2, RS-422 RS-232   Model Name DML40-2-1111S01 Part No. 1044053   Самое главное Measurement range from 0.5 m up to 1,200 m with a reflector Time-of-flight measurement Easy alignment thanks to pilot laser Freely programmable parameters RS-422, RS-232, PROFIBUS, analog and two switching outputs Near field blanking parameter for operation through a protection window Преимущества Extremely long measurement ranges of up to 1,200 m on natural targets offer high flexibility in applications where range is key Special visible alignment laser allows fast and easy alignment - even over long distances, offering fast and cost-effective installation Tough, metal housing design for trouble-free operation in rough environmental conditions Class 1 IR laser for discrete and safe measurement and detection User-friendly software with an easy-to-follow interface ensures fast and cost-optimized setup Serial and analog interfaces as well as two digital switching outputs offer local over/under limit and service signals

Performance
	Resolution:	≤- 1 mm
	Repeatability 1) 2):	6 mm
	Accuracy 3) 4):	± 10 mm
	Light source:	Laser, infrared
	Laser protection class:	2 (fur DML40-2-1111S01)
	Typ. light spot size (distance):	130 mm (at 70 m) 270 mm (at 150 m) 360 mm (at 220 m)
	Average depth:	1/16/64/256/1,024
	Output rate 5):	1 ms / 600 ms
	Note:	Alignment laser always on
	Response time 6):	1 ms ... 600 ms
	Measuring range 7) 8) 9):	0.5 m ... 1,200 m, on reflector OP60 0.5 m ... 600 m, on Diamond Grade 0.5 m ... 800 m, on reflector PL880FS01
	Cycle time:	5,120 per sec.
	Special characteristic:	Alignment laser always on

1) 6 % ... 90 % remission  2) Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 ?  3) 23 °C air temperature, 977 hPa, min. warm-up time 30 min.  4) When operating in ambient temperatures between +40 °C ... +55 °C the accuracy can decrease by factor 2.5  5) 6) Dependant on average setting, average depth, timeout, baud rate, data outpu and output format  7) On Diamond Grade  8) On reflector PL880FS01  9) On reflector OP60

Interfaces
	Switching output 1):	Q1, Q2
	Interface for parametrization:	RS-232
	Analog output:	4 mA ... 20 mA, scalable 2)
	Data interface 3):	RS-422 RS-232

1) 2) Output Q short-circuit protected  3) Switchable

Mechanics/electronics
	Supply voltage Vs:	DC 18 V ... 30 V , limit values
	Residual ripple 1):	5 Vpp
	Initialization time:	6 s
	Weight:	Ca. 1,200 g
	Output current IA:	100 mA
	Power consumption 2):	≤- 6 W
	Connection type:	1 x cable gland, 1 x Sub-D, 9-pin

1) May not fall short of or exceed VS tolerances  2) Without load

Ambient data
	Enclosure rating:	IP 65
	Protection class 1):	III
	EMC:	EN 55011:1998 Kl. B, Gr.1 EN 6100-6-2:1999
	Temperature drift 2) 3):	Typ. 0.3 mm/K Typ. 0.6 mm/K
	Ambient temperature:	Operation: -10 ... 55 °C Operation with cooling case: -10 ... 75 °C Storage: -25 ... 70 °C
	Mechanical load:	Shock: IEC 60068-2-27, -2-29 Sine: IEC 60068-2-6

1) Reference voltage DC 50 V PELV-voltage (EN 50178)  2) -10° C ... 0° C, +40 °C … +55 °C  3) 0 °C ... +40 °C

*изображение на сайте может отличаться от реального

Написать отзыв о DML, DML40-2, RS-422 RS-232 Sick DML40-2-1111S01 (1044053)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: