W15, Through-beam photoelectric sensor Sick WSE15-B2430 (1043328)

Photoelectric sensors
W15, Through-beam photoelectric sensor   Model Name WSE15-B2430 Part No. 1043328   Самое главное Through-beam photoelectric sensor in hybrid design with 5 m sensing range M18 front mount using plastic nut or snap ring, side assembly with 24.1 mm through holes Flush mounting possible using the snap ring Transparent back cover Highly visible sender LED Преимущества Compatible with many competitor models, making it easy to install and commission Flush mounting reduces setup time and prevents obstructions to material flow on conveyor sections Clearly visible LED indicators reduce setup time and simplify troubleshooting Quick and easy alignment due to highly visible light spot

Features
	Dimensions (W x H x D):	16.2 mm x 48.5 mm x 31.9 mm
	Sensing range max.:	0 m ... 5 m
	Sensing range:	0 m ... 3.8 m
	Housing design (light emission):	Hybrid
	Light source:	LED 1)
	Type of light:	Visible red light
	Wave length:	650 nm
	Thread diameter (housing):	M18 x 1
	Sensor/detection principle:	Through-beam photoelectric sensor
	Light spot (distance):	160 mm (4 m)

1) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 67
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	≤- 5 Vpp 2)
	Power consumption:	≤- 30 mA 3)
	Switching output:	PNP, light switching NPN, light switching
	Output current Imax.:	≤- 100 mA
	Response time:	≤- 1.4 ms 4)
	Switching frequency:	350 Hz 5)
	Connection type:	Connector M12, 4-pin
	Protection class:	II 6)
	Circuit protection:	A B D 7) 8) 9)
	Weight:	20 g
	Housing material:	ABS
	Optics material:	PMMA
	Ambient operating temperature:	-25 °C ... 55 °C
	Ambient storage temperature:	-25 °C ... 70 °C
	Items supplied:	Snap-ring and M18 nut
	Angle of dispersion:	1.5 °
	UL File-No.:	UL No. NRKH7.E189383

1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) Reference voltage 50 V DC  7) A = VS connections reverse-polarity protected  8) B = inputs and output reverse-polarity protected  9) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о W15, Through-beam photoelectric sensor Sick WSE15-B2430 (104..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: