W4S-3, Photoelectric retro-reflective sensor, autocollimation Sick WL4S-3P2132 (1042077)

Photoelectric sensors
W4S-3, Photoelectric retro-reflective sensor, autocollimation   Model Name WL4S-3P2132 Part No. 1042077   Самое главное Single-lens autocollimation optics All models with PinPoint LED technology provides a small intense, light spot Maximum sensing range of 5 m Long sensing ranges on small reflectors Преимущества Quick and easy alignment due to the PinPoint LED's small, well-defined, intense light spot Single-lens autocollimation optics sees through small gaps and bore holes, enabling efficient machine integration Long sensing ranges are obtained on small reflectors due to the small, intense light spot

Features
	Dimensions (W x H x D):	12.2 mm x 41.8 mm x 17.3 mm
	Sensing range max.:	0 m ... 5 m 1)
	Sensing range:	0 m ... 3 m 2)
	Housing design (light emission):	Rectangular, Slim
	Light source:	PinPoint LED 3)
	Type of light:	Visible red light
	Wave length:	650 nm
	Light spot diameter (distance):	O 45 mm (1.5 m)
	Sensitivity adjustment:	Teach
	Teach-in:	Single teach-in button
	Sensor/detection principle:	Photoelectric retro-reflective sensor, autocollimation

1) 2) PL80A  3) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 67 IP 66
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	< 5 Vpp 2)
	Power consumption:	≤- 20 mA 3)
	Switching output:	PNP, Light-switching
	Output current Imax.:	≤- 100 mA
	Response time:	< 0.5 ms 4)
	Switching frequency:	1,000 Hz 5)
	Connection type:	Connector M8, 3-pin
	Protection class:	III
	Circuit protection:	A, C, D 6) 7) 8)
	Weight:	30 g
	Housing material:	ABS
	Optics material:	PMMA
	Ambient operating temperature:	-40 °C ... 60 °C
	Ambient storage temperature:	-40 °C ... 75 °C
	Polarisation filter:	Yes
	Special device:	-
	UL File-No.:	UL No. NRKH.E181493 & cUL No. NRKH7.E181493

1) Limit values  2) May not exceed or fall short of VS tolerances  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) A = VS connections reverse-polarity protected  7) C = interference suppression  8) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о W4S-3, Photoelectric retro-reflective sensor, autocollimatio..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: