DMT, DMT10-2, PROFIBUS DP Sick DMT10-2-1211 (1027604)

Long range distance sensors
DMT, DMT10-2, PROFIBUS DP   Model Name DMT10-2-1211 Part No. 1027604   Самое главное Measurement range from 0.5 m up to 155 m on natural targets Excellent accuracy thanks to time-of-flight measurement Easy alignment thanks to pilot laser Freely programmable parameters RS-422, RS-232, PROFIBUS, analog and two switching outputs Near field blanking parameter for operation through a protection window Models with filter for measurement of glowing, hot metal (up to 1,400 °C) Преимущества Extremely wide measurement range of up to 155 m on natural targets offers high flexibility in applications where range is key Supplementary visible alignment laser allows fast and easy alignment - even over long distances, offering fast and cost-effective installation Tough metal housing design for trouble-free operation in the roughest environmental conditions Non-visible, Class 1 IR laser for safe measurement and detection User-friendly software with an easy-to-follow interface ensures fast and cost-optimized setup Serial and analog interfaces as well as two digital switching outputs allow flexible use for varied applications Integrated filter option allows for direct measurement of 1,400 °C glowing, hot targets

Performance
	Resolution:	≤- 1 mm
	Repeatability 1) 2) 3) 4):	10 mm, 7 mm
	Accuracy 5) 6):	± 10 mm
	Light source:	Laser, infrared
	Laser protection class:	1 (EN 60825-1:Nov.2001, IEC 60825-1:AM2:2001)
	Typ. light spot size (distance):	20 mm (+ 5 x distance in m)
	Average depth:	1/16/64/256/1,024
	Output rate 7):	1 ms / 4,000 ms
	Aperture delay time:	≥- 1 s 8)
	Note:	Mechanical aperture
	Response time 9):	1 ms ... 4,000 ms
	Measuring range:	0.5 m ... 155 m, 90 % remision 0.5 m ... 40 m, 6 % remission 0.5 m ... 65 m, 18 % remission
	Cycle time:	1,024 per sec.
	Special characteristic:	Mechanical aperture

1) Dependant on distance and remission, 7 mm, at 6 % ... 90 % remission from 0.5 m ... 65 m, at 6 % ... 18 % remission from 0.5 m ... 40 m, at 6 % remission from 0.5 m ... 15 m  2) 4) Environmental conditions constant, min. warm-up time 30 min, average depth 1,024, statistical error 1 ?  3) Dependant on distance and remission, 10 mm, at 6 % ... 90 % remission from 60 m ... 155 m, at 6 % ... 18 % remission from 40 m ... 65 m, at 6 % remission from 15 m ... 40 m  5) 23 °C air temperature, 977 hPa, min. warm-up time 30 min.  6) When operating in ambient temperatures between +40 °C ... +55 °C the accuracy can decrease by factor 2.5  7) 8) Dependant on average setting, average depth, timeout, baud rate, data outpu and output format  9) Dependant on average setting, average depth, timeout, baud rate, data output, output format and effective dead time of aperture

Interfaces
	Switching output 1):	Q1, Q2
	Interface for parametrization:	RS-232
	Analog output:	4 mA ... 20 mA, scalable
	Data interface:	PROFIBUS DP

1) Output Q short-circuit protected

Mechanics/electronics
	Supply voltage Vs:	DC 18 V ... 30 V , limit values
	Residual ripple 1):	< 5 Vpp
	Initialization time:	6 s
	Weight:	Ca. 1,200 g
	Output current IA:	100 mA
	Power consumption 2):	≤- 6 W
	Connection type:	1 x cable gland, 1 x Sub-D, 9-pin

1) May not fall short of or exceed VS tolerances  2) Without load

Ambient data
	Enclosure rating:	IP 65
	Protection class 1):	III
	EMC:	EN 55011:1998 Kl. B, Gr.1 EN 61000-6-2
	Temperature drift 2) 3):	Typ. 0.3 mm/K Typ. 0.6 mm/K
	Ambient temperature:	Operation: -10 ... 55 °C Operation with cooling case: -10 ... 75 °C Storage: -25 ... 70 °C
	Mechanical load:	Shock: IEC 60068-2-27, -2-29 Sine: IEC 60068-2-6

1) Reference voltage DC 50 V PELV-voltage (EN 50178)  2) -10° C ... 0° C, +40 °C … +55 °C  3) 0 °C ... +40 °C

*изображение на сайте может отличаться от реального

Написать отзыв о DMT, DMT10-2, PROFIBUS DP Sick DMT10-2-1211 (1027604)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: