WTR, Photoelectric proximity sensor, Background suppression Sick WTR1-P421S08 (1016233)

Photoelectric sensors
WTR, Photoelectric proximity sensor, Background suppression   Model Name WTR1-P421S08 Part No. 1016233   Самое главное Product variants of sensor + logic + valve in one housing are available Housing design suited for mounting between the rollers of roller conveyor Precise background suppression with adjustable sensing range from 300 mm to 900 mm Modular structure - with or without solenoid valve or motor actuation, with or without logic Преимущества Easy installation due to all-in-one solution: sensor + logic + valve in one housing Unique design allows mounting under the conveyor protecting the sensor from damage, increasing product life Adjustable background suppression ignores background and reliably detects products without a reflector Stand-alone solution that consolidates cabling, and allows for modular expansion Easy and reliable control of product flow reduces damage and jams, therefore reducing cost

Features
	Dimensions (W x H x D):	18 mm x 99.5 mm x 46 mm
	Sensing range:	300 mm ... 900 mm
	Housing design (light emission):	Fitting roller spacings
	Light source:	LED 1)
	Type of light:	Infrared light
	Adjustment of operating distance:	Adjustable via scanning distance adjustment
	Sensor/detection principle:	Photoelectric proximity sensor, Background suppression
	Light spot (distance):	40 mm (900 mm)

1) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 54
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	< 5 Vpp 2)
	Power consumption:	< 25 mA 3)
	Switching output:	PNP, Dark-switching
	Output current Imax.:	≤- 100 mA
	Switching frequency:	250 Hz
	Connection type:	Connector M12, 4-pin
	Protection class:	II 4)
	Circuit protection:	A, C, D 5) 6) 7)
	Weight:	100 g
	Housing material:	ABS
	Ambient operating temperature:	-40 °C ... 60 °C
	Ambient storage temperature:	-40 °C ... 75 °C
	Signal voltage PNP HIGH / LOW:	Approx. VS - < 2.0 V / 0 V
	UL File-No.:	UL No. NRKH.E181493 & cUL No. NRKH7.E181493

1) Limit values  2) May not exceed or fall short of VS  3) Without load, without valve  4) Reference voltage 50 V DC  5) A = VS connections reverse-polarity protected  6) C = interference suppression  7) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о WTR, Photoelectric proximity sensor, Background suppression ..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: