W18-2, Photoelectric proximity sensor, Background suppression Sick WTV18-2P410 (1016198)

Photoelectric sensors
W18-2, Photoelectric proximity sensor, Background suppression   Model Name WTV18-2P410 Part No. 1016198   Самое главное High-performance background suppression with large sender/receiver distance and special V-optics Variants available for short and longer sensing distances Sensing distance adjustment via potentiometer Connection: M12, 4-pin Преимущества High-performance background suppression with large transmitter/receiver distance and special V-optics ensure reliable object detection Reliable detection of highly reflective surfaces Less downtime in industrial environments Crosstalk and ambient light immunity reduce false readings

Features
	Dimensions (W x H x D):	20 mm x 76 mm x 31.5 mm
	Sensing range max.:	60 mm ... 120 mm 1)
	Sensing range:	60 mm ... 120 mm 2)
	Housing design (light emission):	Rectangular, Slim
	Light source:	LED 3)
	Type of light:	Infrared light
	Wave length:	586 nm
	Sensitivity adjustment:	Potentiometer, 9-turn
	Sensor/detection principle:	Photoelectric proximity sensor, Background suppression
	Light spot (distance):	8 mm (120 mm)

1) Object with 6 % remission  2) Object with 90 % reflectance (referred to standard white DIN 5033)  3) Average service life 100,000 h at Ta = +25 °C

Mechanics/electronics
	Enclosure rating:	IP 67
	Supply voltage:	10 V DC ... 30 V DC 1)
	Residual ripple:	< 5 Vpp 2)
	Power consumption:	30 mA 3)
	Switching output:	PNP, Light/dark-switching
	Output current Imax.:	100 mA
	Response time:	< 2,000 µs 4)
	Switching frequency:	250 Hz 5)
	Connection type:	Connector M12, 4-pin
	Circuit protection:	A, C, D 6) 7) 8)
	Weight:	60 g
	Housing material:	ABS
	Optics material:	PMMA
	Ambient operating temperature:	-25 °C ... 60 °C
	Ambient storage temperature:	-25 °C ... 60 °C
	Voltage supply-LED:	Yes
	Output indicator:	Yes
	Special features:	V-optics

1) Limit values, operation in short-circuit protected network max. 8 A  2) May not exceed or fall short of VS  3) Without load  4) Signal transit time with resistive load  5) With light/dark ratio 1:1  6) A = VS connections reverse-polarity protected  7) C = interference suppression  8) D = outputs overcurrent and short-circuit protected

*изображение на сайте может отличаться от реального

Написать отзыв о W18-2, Photoelectric proximity sensor, Background suppressio..

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: