Sick ZLM1-B1622E42 (7028844)

Zone control
Model Name ZLM1-B1622E42 Part No. 7028844   Самое главное Solenoid valve for controlling the actuator Integrated logic ensures controlled flow of goods on conveyor systems, e.g. single feed, block feed, single release, or block release Facility for connecting any binary sensor, e.g., optoelectronic, inductive, etc. Connecting cable for sensors mounted farther away Installation in the conveyor's side tray Преимущества The ideal standalone solution, saving on cabling, simplifying control, and permitting clearly structured, modular expansion of conveyor systems Space-saving and protected mounting, integration below conveying level Controlled flow of goods with starting/stopping within a conveyor belt - easy and reliable Short restart time as well as simple troubleshooting and maintenance of conveyor systems due to controlled material flow - and therefore reduced costs. Flexible process engineering through modularity

Features
	Enclosure rating:	IP 40
	Dimensions (W x H x D):	31 mm x 105 mm x 74 mm
	Sensor principle:	Logic module

Mechanics/electronics
	Switching output:	PNP
	Housing material:	ABS
	Weight:	170 g
	Supply voltage:	21.6 V DC ... 27.6 V DC 1)
	Residual ripple:	< 5 Vpp 2)
	Power consumption:	< 25 mA 3)
	Signal voltage PNP HIGH / LOW:	Approx. VS - < 2.0 V / 0 V
	Output current Imax.:	≤- 100 mA
	Connection type:	Cable with receptacle, M12, 4-pin 1.1 m 4)
	Number of cores:	4
	VDE protection class:	II
	Circuit protection:	A C D 5) 6) 7)
	Number of sensors in series:	ca. 28 8)
	Actuator control:	pneumatic
	Logical functions:	slug release, single release, individual feed
	Media connector:	compressed air or neutral gases filtered, non-lubricated or lubricated
	Design solenoid valve:	3/2-way valve 9)
	Mode of operation solenoid valve:	air-to-brake
	Connection type solenoid valve:	instant-plug-in connector control line 4 mm diameter, instant-plug-in connector compressed air 8 mm diameter
	Coil voltage:	24 V DC
	Coil performance:	1 W
	Air flow rate:	ca. 20 Nl/min 10)
	Operating pressure range:	2 bar ... 8 bar 11)
	Ventilation capacity:	ca. 130 Nl/min 12)
	Cable material:	PVC
	Connection for adjacent ZLR:	Connector M12, 4-pin
	Connection for sensor:	Cable with receptacle, M12, 4-pin 13)

1) Limit values, the device may connect only to protected extra low voltage  2) May not exceed or fall short of VS  3) Without load, without valve  4) Do not bend below 0 °C  5) A = VS connections reverse-polarity protected  6) C = interference suppression  7) D = outputs overcurrent and short-circuit protected  8) Maximum per power supply at 26.4 V DC, dependent on current power consumption by the sensor  9) Other valve types available on request  10) P - A  11) In combination with cylinders with small air volume we recommend tests  12) A - R  13) Connection of reflex switch PNP light switching. For the connection of proximity switch PNP dark switching and inductive sensor PNP normally closed, an additional adapter is required to put pin 2 at the sensor to pin 4 for the ZLM

Ambient data
	Ambient operating temperature:	-10 °C ... 55 °C
	Ambient storage temperature:	-25 °C ... 75 °C

*изображение на сайте может отличаться от реального

Написать отзыв о Sick ZLM1-B1622E42 (7028844)

Ваше Имя:


Ваш отзыв:

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: