Ничего не куплено!
Поставки и внедрение датчиков, сенсоров, систем идентификации и контроля
Mail: prom@protonpc.ru
Тел: (495) 789-41-64 доб. 294
Описание | ||
KE switch cabinet module 4 inputs and 4 outputs | ||
Основные характеристики | ||
Slave type | Standard slave | |
AS-Interface specification | V3.0 | |
Required master specification | &ge- V2.0 | |
UL File Number | E87056 | |
Показатели надежности и наработки на отказ | ||
MTTFd | 190 a | |
Mission Time (TM) | 20 a | |
DC (Diagnostic Coverage, Диагностическое покрытие) | 0 % | |
Индикаторы состояния и их значение | ||
LED FAULT | Error display- красный светодиод red: communication error, i.e. address is 0 red flashing: overload internal input supply, i.e. overload or lead interruption outputs | |
LED INT | Internal input supply active- зеленый светодиод | |
LED PWR | AS-Interface voltage- зеленый светодиод green: voltage OK flashing green: address 0 | |
LED AUX | ext. auxiliary voltage UAUX- dual зеленый светодиод/red green: voltage OK red: reverse voltage | |
LED IN | switching state (input)- 4 желтый светодиод | |
LED OUT | switching state (output)- 4 желтый светодиод/red yellow: output active red: output overload or lead interruption | |
Электрические параметры | ||
Auxiliary voltage (input) | 12 ... 30 V DC PELV | |
Auxiliary voltage (output) | 20 ... 30 V DC PELV | |
Rated operational voltage | 26.5 ... 31.6 V from AS-Interface | |
Номинальный рабочий ток | &le- 35 mA (without sensors) / max. 190 mA | |
Protection class | III | |
Overvoltage protected | UEXT, UAUX, Ue: Over voltage category III, safe isolated power supplies (PELV) | |
Вход | ||
Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC | |
Питание | from AS-Interface (switch position INT, basic setting) or external UEXT (switch position EXT) | |
Voltage | 21 ... 31 V DC (INT) | |
Current loading capacity | &le- 150 mA, overload- and защита от короткого замыкания (INT) | |
Input current | &le- 9 mA (limited internally) | |
Switching point | according to DIN EN 61131-2 (Type 2) | |
0 (unattenuated) | &le- 3 mA | |
1 (attenuated) | &ge- 5 mA | |
Signal delay | < 1 ms (input/AS-Interface) | |
Выход | ||
Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof | |
Питание | from external auxiliary voltage UAUX | |
Current | 2 A per output, sum 4A (TB &le- 40 °C) 0.5 A per output, total 2A (TB &le- 60 °C, arranged in series without gaps) 2 A per output, total 4A (TB &le- 60 °C, arranged in series with 5 mm gap) | |
Voltage | &ge- (UAUX - 0.5 V) | |
Usage category | DC-13 | |
Programming instructions | ||
Profile | S-7.0 | |
IO code | 7 | |
ID code | 0 | |
ID1 code | F | |
ID2 code | E | |
Data bits (function via AS-Interface) | ||
D0 | ||
D1 | ||
D2 | ||
D3 | ||
Parameter bits (programmable via AS-i) | function | |
P0 | Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (basic setting) | |
P1 | Input filter P1 = 0 input filter on, pulse suppression &le- 2 ms P1 = 1 input filter off (basic setting) | |
P2 | Lead breakage outputs P2 = 0 lead breakage on P2 = 1 lead breakage off (basic setting) | |
P3 | not used | |
Соответствие промышленным стандартам | ||
Соответствие директивам | ||
EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50295:1999 | |
Соответствие индустриальным стандартам | ||
Шумозащищенность | EN 61000-6-2:2005, EN 61326-1:2006, EN 50295:1999 | |
Излучаемые помехи | EN 61000-6-4:2007 | |
Input | EN 61131-2:2004 | |
Степень защиты корпуса | EN 60529:2000 | |
Fieldbus standard | EN 50295:1999, IEC 62026-2:2006 | |
Условия окружающей среды | ||
Рабочая температура окружающей среды | -25 ... 60 °C (-13 ... 140 °F) | |
Температура хранения устройства | -25 ... 85 °C (-13 ... 185 °F) | |
Relative humidity | 90 % , noncondensing | |
Pollution Degree | 2 | |
Физические/механические параметры | ||
Стандарты защищенности | IP20 | |
Подключение | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2 | |
Материал | ||
Корпус | PA 66-FR | |
Масса | 150 g | |
Mounting | DIN rail |
Совместимое оборудование | Наименование |
VBP-HH1-V3.0-KIT | AS-Interface Handheld with accessory |
VAZ-PK-1,5M-V1-G | Connection cable module/hand-held programming device |