AS-Interface sensor/actuator module VAA-4E4A-G11-ZAJ/EA2L-FV1
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
- Inputs for 2-, 3-, and 4-wire sensors
- Power supply of outputs from the external auxiliary voltage
- Supply of sensors from AS-Interface
- Индикация функционирования for bus, external auxiliary voltage, in- and outputs
- красный светодиод per channel, lights up in the event of output overload
- Communication monitoring
- Switchable lead breakage detection (outputs)
- Cable piercing method with gold plated contact pins
- Степень защиты IP68/IP69K
- AS-Interface POWER24
Технические характеристики: VAA-4E4A-G11-ZAJ/EA2L-FV1
| Описание | ||
| G11 module 4 inputs and 4 outputs | ||
| Основные характеристики | ||
| Slave type | Standard slave | |
| AS-Interface specification | V3.0 | |
| Required master specification | &ge- V2.1 | |
| UL File Number | E87056 | |
| Индикаторы состояния и их значение | ||
| LED AS-i/FAULT | Status display- multi-colour LED Green: normal operation Red: communication fault Flashing yellow/red: address 0 Flashing green/red: sensor supply i.e. overload or lead interruption outputs | |
| LED AUX | ext. auxiliary voltage UAUX- dual зеленый светодиод/red green: voltage OK red: reverse voltage | |
| LED IN | switching state (input)- 4 желтый светодиод | |
| LED OUT | switching state (output)- 4 желтый светодиод/red yellow: output active red: output overload or lead interruption | |
| Электрические параметры | ||
| Auxiliary voltage (output) | 20 ... 30 V DC PELV | |
| Rated operational voltage | 18,0 ... 31.6 V from AS-Interface | |
| Номинальный рабочий ток | &le- 40 mA (without sensors) / max. 240 mA | |
| Protection class | III | |
| Overvoltage protected | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) | |
| Вход | ||
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC | |
| Питание | from AS-Interface | |
| Voltage | 12 ... 31 V | |
| Current loading capacity | &le- 200 mA, overload and защита от короткого замыкания | |
| Input current | &le- 9 mA (limited internally) | |
| Switching point | according to DIN EN 61131-2 (Type 2) | |
| 0 (unattenuated) | &le- 3 mA | |
| 1 (attenuated) | &ge- 5 mA | |
| Signal delay | < 1 ms (input/AS-Interface) | |
| Выход | ||
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof | |
| Питание | from external auxiliary voltage UAUX | |
| Current | 2 A per output TB &le- 40 °C: 6 A total TB &le- 70 A°C: sum O1 + O2 max. 2 A, sum O3 + O4 max. 2 A | |
| Voltage | &ge- (UAUX - 0.5 V) | |
| Electrical isolation | ||
| Input/Output | safe isolation, rated insulation voltage 40 V DC | |
| Output/AS-Interface | safe isolation, rated insulation voltage 40 V DC | |
| Programming instructions | ||
| Profile | S-7.F | |
| IO code | 7 | |
| ID code | F | |
| ID1 code | F | |
| ID2 code | E | |
| Data bits (function via AS-Interface) | ||
| D0 | ||
| D1 | ||
| D2 | ||
| D3 | ||
| Parameter bits (programmable via AS-i) | function | |
| P0 | Communication monitoring P0 = 0 monitoring = off, the outputs maintain the status if communication fails P0 = 1 monitoring = on, i.e. if communication fails, the outputs are deenergised (basic setting) | |
| P1 | Input filter P1 = 0 input filter on, pulse suppression &le- 2 ms P1 = 1 input filter off (basic setting) | |
| P2 | Lead breakage outputs P2 = 0 lead breakage on P2 = 1 lead breakage off (basic setting) | |
| P3 | not used | |
| Соответствие промышленным стандартам | ||
| Соответствие директивам | ||
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50295:1999 | |
| Соответствие индустриальным стандартам | ||
| Шумозащищенность | EN 61000-6-2:2005, EN 61326-1:2006, EN 50295:1999 | |
| Излучаемые помехи | EN 61000-6-4:2007 | |
| Input | EN 61131-2:2007 | |
| Степень защиты корпуса | EN 60529:2000 | |
| Fieldbus standard | EN 50295:1999, IEC 62026-2:2006 | |
| Условия окружающей среды | ||
| Рабочая температура окружающей среды | -25 ... 70 °C (-13 ... 158 °F) | |
| Температура хранения устройства | -25 ... 85 °C (-13 ... 185 °F) | |
| Физические/механические параметры | ||
| Стандарты защищенности | IP68 / IP69K | |
| Подключение | AS-Interface/UAUX: AS-Interface flat cable or M12 round connector Inputs/outputs: M12 round connector | |
| Материал корпуса | ||
| Корпус | PBT PC | |
| Крепление винтами | Нержавеющая сталь 1.4305 / AISI 303 | |
| Масса | 200 g | |
| Mounting | Mounting base | |
Аксессуары и комплектующие
| Совместимое оборудование | Наименование |
| VBP-HH1-V3.0-KIT | AS-Interface Handheld with accessory |
| VAZ-PK-1,5M-V1-G | Connection cable module/hand-held programming device |
| VAZ-V1-B | Blind plug |
| VAZ-FK-S-BK-SEAL | AS-Interface seal |
Нет отзывов об этом товаре.
Написать отзыв о AS-Interface sensor/actuator module VAA-4E4A-G11-ZAJ/EA..
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: