Пром. автоматизация
» » » » »

Multi component analyzing system Sick MCS300P HW (MCS300P HW)

Multi component analyzing system Sick MCS300P HW (MCS300P HW)
Производитель: Sick
Артикул: MCS300P HW
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Analyzer systems
Multi component analyzing system
 
Model NameMCS300P HW
 

The MCS300P HW is a hot/extractive analyzer system for measurement of gases. It measures IR- or VIS-active components with variable measuring ranges for monitoring and controlling of combustion and flue gas conditioning. The heated system components prevent a temperature drop below the water and acid dewpoint. This results in lower maintenance and higher reliablity and long-time stablity of the system, also under rugged and demanding conditions. Automatic adjustment functions, easy operation concept and modern communication protocols results in a quick and easy integration into a local control system network.

Самое главное

  		• Simultaneous measurement of up to 6 components plus O2
  		• Sample flow control and sample gas pressure measurement
  		• Temperature of heated system components up to 220 °C
  		• Automatic sample point switching for up to 8 sample points (option)
  		• Automatic adjustment of zero and span point
  		• Integrated adjustment unit without span gas (option)
  		• Extended operation via PC and software
  		• Flexible I/O modules

    Преимущества

  		• Economic, automatic adjustment without expensive test gases
  		• Easy remote control by integration in existing networks
  		• Automatic control of the complete measuring system and probe
  		• Low maintenance and reliable due to hot measurement
  		• In combination with probe SCP3000 also for measurements at high dust loads and high temperatures

    Fields of application

  		• Monitoring of flue gas conditioning in waste or sewage sludge incinerators
  		• Monitoring of the scrubber in flue gas conditioning
  		• Measurement directly at the kiln inlet in cement plants
     

    Technical data
    Measuring principle:Gas filter correlation, Interference filter correlation, Zirconium dioxide sensor
    Number of measuring components:6
    Measuring ranges:CO: 0 ... 800 ppm / 0 ... 5 Vol.-%
    CO2: 0 ... 20 Vol.-% / 0 ... 100 Vol.-%
    H2O: 0 ... 1 Vol.-% / 0 ... 60 Vol.-%
    HCl: 0 ... 700 ppm / 0 ... 12,000 ppm
    N2O: 0 ... 500 ppm / 0 ... 7,500 ppm
    NH3: 0 ... 530 ppm / 0 ... 5,300 ppm
    NO: 0 ... 750 ppm / 0 ... 15,000 ppm
    NO2: 0 ... 500 ppm / 0 ... 4,000 ppm
    O2: 0 ... 1 Vol.-% / 0 ... 21 Vol.-%
    SO2: 0 ... 200 ppm / 0 ... 10 Vol.-%
    Remark:2 measuring ranges per component, Other measuring ranges and components on request
    Sample quantity:150 ... 800 l/h
    Process temperature:Sample gas inlet: ≤-220 °C, Process: ≤-1,300 °C
    Process pressure:800 ... 1,200 hPa
    Ambient temperature:5 ... 35 °C
    temperature change max. ±10 °C/h, With cooling device: 5 ... 45 °C
    temperature change max. ±10 °C/h
    Ambient humidity:≤-80 %
    non-condensing
    Electrical safety:CE
    Enclosure rating:IP 43
    higher enclosure rating on request
    Analogue outputs:2 outputs:
    0/4 ... 22 mA, 500 Ω-
    electrically isolated- additional outputs if using I/O modules (option)
    Analogue inputs:2 inputs:
    0/4 ... 22 mA, 100 Ω-
    electrically isolated- additional inputs if using I/O modules (option)
    Digital outputs:2 power relays
    electrically isolated- additional outputs if using I/O modules (option), 3 floating contacts
    additional outputs if using I/O modules
    Digital inputs:2 floating contacts
    additional inputs if using I/O modules
    Interfaces:Ethernet
    Bus protocol:Modbus TCP, OPC
    Operation:Application specific programs for system control, Via operating unit in the analyzer, Via software SOPAS ET, Two operating levels, one password-protected
    Device types:Steel sheet cabinet
    System components:Analyzer cabinet, Heated sample gas line, Sampling probe, Sample point switching (max. 8 sample points)
    Correction functions:Internal adjustment unit (option)
    Test functions:Automatic control cycle for zero and span point, Status LEDs "Power", "Maintenance" and "Fault"
    Note:The scope of delivery depends on application and customer specifications.



    *изображение на сайте может отличаться от реального
    Нет отзывов об этом товаре.

    Написать отзыв о Multi component analyzing system Sick MCS300P HW (MCS300P HW..

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке:



    Отправить