Пром. автоматизация
» » » » »

FTIR multi-component analyzing system Sick MCS100FT (MCS100FT)

FTIR multi-component analyzing system Sick MCS100FT (MCS100FT)
Производитель: Sick
Артикул: MCS100FT
Цена: ПО ЗАПРОСУ
Получить скидку и купить со склада↓
   - или -   
Запрос в один клик
   - или -   
Отзывов: 0   Нет оценок   |    Отзывов: 0   |   Поставить свою оценку
Analyzer systems
FTIR multi-component analyzing system
 
Model NameMCS100FT
 

The FTIR measuring principle allows the simultaneous determination of more than 10 measuring components - tailor-made for the particular requirements of the customer. The MCS100FT FTIR analyzer system with its heated measuring cell enables the monitoring of hydrogen fluoride limits as requested by legislation. The MCS100FT is equipped with an oxygen sensor as standard and can be supplemented with a total hydrocarbon analyzer. With its reliable measuring technology, its easy operation and low maintenance requirements, the MCS100FT provides a solution that offers unequalled opportunities.

Самое главное

  		• Lowest approved HF measuring range of 0 ... 3 mg/m3
  		• Automatic spectrum adjustment via AutoVAL for reliable measuring values
  		• Operation via touchscreen
  		• Sample gas transport by an ejector without moving parts
  		• Approved according to EN 15267-3
  		• Remote control and diagnosis via software SOPAS ET
  		• Automatic adjustment, backflushing and filter cleaning

    Преимущества

  		• Proper HF limit value monitoring
  		• Only one analyzer for more than 10 measuring components
  		• Easy integration into the customer network environment
  		• Long maintenance interval of 6 months for most components
  		• Type approved measurement of greenhouse gases such as N2O, CH4 and CO2
  		• Low maintenance requirements

    Fields of application

  		• Emission monitoring in waste incineration plants
  		• Effective HF limit value monitoring, e.g in aluminum production
  		• Monitoring of gaseous emission of cement plants or power stations
     

    Technical data
    Measuring principle:Flame ionisation detection, FTIR spectroscopy, Zirconium dioxide sensor
    TUV-approved measurand:CH4, CO, CO2, Corg, H2O, HCl, HF, N2O, NH3, NO, NO2, O2, SO2
    Number of measuring components:13
    Measuring ranges:C3H8: 0 ... 25 ppm
    Corg: 0 ... 7.5 ppm / 0 ... 75 ppm
    CH4: 0 ... 70 ppm / 0 ... 210 ppm
    CO: 0 ... 60 ppm / 0 ... 1,200 ppm
    CO2: 0 ... 25 Vol.-%
    H2O: 0 ... 40 Vol.-%
    HCl: 0 ... 10 ppm / 0 ... 100 ppm
    HF: 0 ... 3 ppm / 0 ... 10 ppm
    N2O: 0 ... 25 ppm / 0 ... 250 ppm
    NH3: 0 ... 13 ppm / 0 ... 65 ppm
    NO: 0 ... 150 ppm / 0 ... 1,500 ppm
    NO2: 0 ... 25 ppm / 0 ... 250 ppm
    NOx: 0 ... 100 ppm / 0 ... 1,000 ppm
    O2: 0 ... 21 Vol.-%
    SO2: 0 ... 25 ppm / 0 ... 525 ppm
    Remark:Other measuring ranges and components on request, Measuring ranges depend on application and device type
    Measuring paths:≤-8.5 m
    optical path length of measuring cell
    Sample quantity:≤-300 l/h
    Process temperature:≤-200 °C
    temperature at analyzer inlet
    Process pressure:900 ... 1,200 hPa
    Ambient temperature:With cooling device: 5 ... 50 °C, Standard: 5 ... 35 °C
    Ambient humidity:0 ... 80 %
    relative humidity- non-condensing
    Conformities:2000/76/EC, 2001/80/EC, 27. BImSchV.
    Electrical safety:CE
    Enclosure rating:IP 43, Optional: IP 54
    Analogue outputs:10 outputs:
    0/4 ... 22 mA, 500 Ω-
    depends on system configuration- electrically isolated- max. 32 outputs
    Analogue inputs:4 inputs:
    0/4 ... 22 mA, 100 Ω-
    depends on system configuration- electrically isolated- max. 32 inputs
    Digital outputs:8 outputs:
    48 V AC, 0.5 A, 35 VA / 48 V DC, 0.5 A, 24 W
    depends on system configuration- electrically isolated- max. 64 outputs
    Digital inputs:4 inputs:
    3.9 V, 4.5 mA, 0.55 W
    depends on system configuration- max. 64 inputs
    Interfaces:Ethernet, RS-232, RS-422/RS-485
    Bus protocol:Ethernet TCP/IP, MODBUS, OPC
    Operation:Via LC-display or software SOPAS ET
    System components:Analyzer, Operating unit, I/O module, Temperature control unit
    Correction functions:Automatic adjustment of zero and span point
    Note:The scope of delivery depends on application and customer specifications.



    *изображение на сайте может отличаться от реального
    Нет отзывов об этом товаре.

    Написать отзыв о FTIR multi-component analyzing system Sick MCS100FT (MCS100F..

    Ваше Имя:


    Ваш отзыв:

    Оценка: Плохо           Хорошо

    Введите код, указанный на картинке:



    Отправить