Functions-Sender |
| Beam coding: | - | |
| Reduced resolution: | - | |
| Configuration method: | hard wired | |
| Extension connection: | - | |
| Safe device communication via EFI/SDL: | - | |
Functions-Receiver |
| Restart interlock: | Yes | |
| Restart interlock (delivery status): | Internal | |
| External device monitoring: | Yes | |
| External device monitoring (delivery status): | Deactivated | |
| Beam coding: | - | |
| Reduced resolution: | - | |
| PSDI mode with: | Flexi Soft | |
| Configuration method: | hard wired | |
| Extension connection: | - | |
| Safe device communication via EFI/SDL: | - | |
Technical Data-Sender |
| Protective field height: | 1,200 mm | |
| Resolution: | 30 mm | |
| Housing length: | 1,422 mm | |
| Housing diameter: | 52 mm | |
| Safety integrity level: | SIL3 (IEC 61508), SILCL3 (IEC 62061) | |
| Category: | category 4 (EN ISO 13849) | |
| Performance level: | PL e (EN ISO 13849) | |
| PFHd: | 1.5 * 1E-08 | |
| TM (mission time): | 20 a | |
| Enclosure rating: | IP 67 IP 66 IP 65 | |
| Protection class: | III (IEC 536:1976) | |
| Ambient operating temperature from ... to: | 0 °C ... 55 °C | |
| Ambient temperature operation, heater: | -30 °C ... 15 °C, with heating switched on | |
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | |
| Oscillation frequency from ... to: | 10 Hz ... 55 Hz | |
| Shock resistance: | 10 g, 16 ms (IEC 60068-2-29) | |
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | |
| Power consumption: | ≤- 350 mA | |
| Supply voltage heating: | 230 V AC | |
| Power consumption heating: | 70 W / -30 °C | |
| Wave length: | 950 nm | |
| Connection type: | PVC cable, 15 m | |
| Maximum connection cable cross-section: | 0.25 mm? | |
| Material, end caps: | Stainless steel | |
| Material, Plastic tube: | PMMA | |
| Material, Compensation element (membrane): | PA 6 | |
| Material, PG connector: | PA 6 | |
Technical Data-Receiver |
| Protective field height: | 1,200 mm | |
| Resolution: | 30 mm | |
| Scanning range from ... to: | 0 m ... 4.5 m | |
| Housing length: | 1,422 mm | |
| Housing diameter: | 52 mm | |
| Safety integrity level: | SIL3 (IEC 61508), SILCL3 (IEC 62061) | |
| Category: | category 4 (EN ISO 13849) | |
| Performance level: | PL e (EN ISO 13849) | |
| PFHd: | 1.5 * 1E-08 | |
| TM (mission time): | 20 a | |
| Enclosure rating: | IP 67 IP 66 IP 65 | |
| Protection class: | III (IEC 536:1976) | |
| Ambient operating temperature from ... to: | 0 °C ... 55 °C | |
| Ambient temperature operation, heater: | -30 °C ... 15 °C, with heating switched on | |
| Vibration resistance (checked to): | 5 g (IEC 60068-2-6) | |
| Oscillation frequency from ... to: | 10 Hz ... 55 Hz | |
| Shock resistance: | 10 g, 16 ms (IEC 60068-2-29) | |
| Response time without beam coding: | ≤- 13 ms | |
| Supply voltage typical, from, to: | 24 V DC, 19.2 V DC, 28.8 V DC | |
| Power consumption: | ≤- 450 mA | |
| Maximum switching current: | 500 mA | |
| Supply voltage heating: | 230 V AC | |
| Power consumption heating: | 70 W / -30 °C | |
| Wave length: | 950 nm | |
| Connection type: | PVC cable, 15 m | |
| Maximum connection cable cross-section: | 0.25 mm? | |
| Material, end caps: | Stainless steel | |
| Material, Plastic tube: | PMMA | |
| Material, Compensation element (membrane): | PA 6 | |
| Material, PG connector: | PA 6 | |
*изображение на сайте может отличаться от реального