L27 Sick (2043876)
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
| Single-beam photoelectric safety switch | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Applications | |||
| Access protection (vertical): | Yes | ||
| Technical Data-Sender | |||
| Typical range: | 0 m ... 25 m | ||
| Maximum scanning range: | 0 m ... 35 m | ||
| Number of beams: | 1 | ||
| Light spot diameter (distance): | 200 mm (10 m) | ||
| Aperture angle/receiving angle: | according to type 2 (IEC 61496-2) | ||
| Light sender/type of light: | LED / visible red light | ||
| Wave length: | 660 nm | ||
| Average service life (TA): | 100,000 h (25 °C) | ||
| Protection class: | II | ||
| Enclosure rating: | IP 67 | ||
| Type: | Type 2 (EN 61496) 1) | ||
| Safety integrity level: | SIL1 (IEC 61508) SILCL1 (IEC 62061) 2) | ||
| Category: | category 2 (EN ISO 13849) 3) | ||
| Test rate (external test): | 100 /s (EN ISO 13849) 4) | ||
| Maximum demand rate: | 60 /min (EN ISO 13849) 5) | ||
| Performance level: | PL c (EN ISO 13849) 6) | ||
| PFHd: | 1.0 * 1E-06 7) | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 16.8 V DC, 28.8 V DC 8) | ||
| Maximum power consumption: | ≤- 35 mA | ||
| Diagnostic display: | LED | ||
| Design: | Rectangular | ||
| Dimensions (W x H x D): | 80.6 mm x 24.6 mm x 54 mm | ||
| Connection type: | plug M12 x 4 | ||
| Housing material: | ABS | ||
| Ambient operating temperature from ... to: | -40 °C ... 60 °C | ||
| Storage temperature from ... to: | -40 °C ... 75 °C | ||
| Weight: | 100 g | ||
| 1) 2) 3) 6) 7) Only in conjunction with suitable testing device, e.g., Flexi Classic, DeviceNet Safety 4) The test rate shall not be exceeded 5) Between two demands on a safety-related response of the device, at least 100 internal or external tests must be carried out. 8) Reverse polarity protected |
| Technical Data-Receiver | |||
| Typical range: | 0 m ... 25 m | ||
| Maximum scanning range: | 0 m ... 35 m | ||
| Number of beams: | 1 | ||
| Light spot diameter (distance): | 200 mm (10 m) | ||
| Aperture angle/receiving angle: | according to type 2 (IEC 61496-2) | ||
| Protection class: | II | ||
| Enclosure rating: | IP 67 | ||
| Type: | Type 2 (EN 61496) 1) | ||
| Safety integrity level: | SIL1 (IEC 61508) SILCL1 (IEC 62061) 2) | ||
| Category: | category 2 (EN ISO 13849) 3) | ||
| Test rate (external test): | 100 /s (EN ISO 13849) 4) | ||
| Maximum demand rate: | 60 /min (EN ISO 13849) 5) | ||
| Performance level: | PL c (EN ISO 13849) 6) | ||
| PFHd: | 1.0 * 1E-06 7) | ||
| TM (mission time): | 20 a | ||
| Supply voltage typical, from, to: | 24 V DC, 16.8 V DC, 28.8 V DC 8) | ||
| Switching outputs: | PNP, Q and Q not 9) | ||
| Maximum switching sequence: | 1,000 Hz | ||
| Maximum switching current: | 100 mA | ||
| Maximum power consumption: | ≤- 25 mA | ||
| Diagnostic display: | LED | ||
| Design: | Rectangular | ||
| Dimensions (W x H x D): | 80.6 mm x 24.6 mm x 54 mm | ||
| Connection type: | plug M12 x 4 | ||
| Housing material: | ABS | ||
| Ambient operating temperature from ... to: | -40 °C ... 60 °C | ||
| Storage temperature from ... to: | -40 °C ... 75 °C | ||
| Weight: | 100 g | ||
| 1) 2) 3) 6) 7) Only in conjunction with suitable testing device, e.g., Flexi Classic, DeviceNet Safety 4) The test rate shall not be exceeded 5) Between two demands on a safety-related response of the device, at least 100 internal or external tests must be carried out. 8) Reverse polarity protected 9) Short-circuit protected, interference suppression |
*изображение на сайте может отличаться от реального
Нет отзывов об этом товаре.
Написать отзыв о L27 Sick (2043876)
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: