WS/WE12-2 Sick WS/WE12-2P160 (1018046)

Производитель: Sick
Артикул: 1018046

Цена: ПО ЗАПРОСУ

Получить скидку и купить со склада↓

- или -

Запрос в один клик

- или -

В закладки
В сравнение

Нет оценок | Отзывов: 0 | Поставить свою оценку

Описание Отзывы (0) о 1018046

Single-beam photoelectric safety switch

WS/WE12-2

Model Name

WS/WE12-2P160

Part No.

1018046

Compact design

Infrared light

Insensitive to external light sources

Die-cast housing

Note: The product has been phased out. The replacement depends on the application. A replacement option can be found in the product group single-beam photoelectric safety switches.

Please contact your national subsidiary/agent for further information.

Applications
	Access protection (vertical):	Yes

Technical Data-Sender
	Scanning range:	0 m, 10 m, 12 m
	Number of beams:	1
	Light spot diameter (distance):	500 mm (10 m)
	Aperture angle/receiving angle:	± 1,5 ° / ± 5 °
	Light sender/type of light:	Infrared light
	Wave length:	880 nm
	Average service life (TA):	100,000 h (25 °C)
	Protection class:	II
	Enclosure rating:	IP 67
	Type:	Type 2 (EN 61496), only in conjunction with suitable testing device
	Supply voltage typical, from, to:	16,8 V DC, 24 V DC, 28,8 V DC, reverse polarity protected
	Maximum power consumption:	35 mA
	Diagnostic display:	LED
	Design:	Rectangular
	Dimensions (W x H x D):	49 x 15 x 41,5 mm
	Connection type:	Cable, 2 m
	Housing material:	Zinc die-cast
	Ambient operating temperature from ... to:	-40 ... 60 °C
	Storage temperature from ... to:	-40 ... 75 °C
	Weight:	200 g

Technical Data-Receiver
	Scanning range:	0 m, 10 m, 12 m
	Number of beams:	1
	Light spot diameter (distance):	500 mm (10 m)
	Aperture angle/receiving angle:	± 1,5 ° / ± 5 °
	Light sender/type of light:	Infrared light
	Wave length:	880 nm
	Average service life (TA):	100.000 h (25 °C)
	Protection class:	II
	Enclosure rating:	IP 67
	Type:	Type 2 (EN 61496), only in conjunction with suitable testing device
	Supply voltage typical, from, to:	16,8 V DC, 24 V DC, 28,8 V DC, reverse polarity protected
	Switching outputs:	PNP, Q and Q not, short-circuit protected, interference suppression
	Maximum switching sequence:	1,000 Hz
	Maximum switching current:	100 mA
	Maximum power consumption:	25 mA
	Diagnostic display:	LED
	Design:	Rectangular
	Dimensions (W x H x D):	49 x 15 x 41,5 mm
	Connection type:	Cable, 2 m
	Housing material:	Zinc die-cast
	Ambient operating temperature from ... to:	-40 ... 60 °C
	Storage temperature from ... to:	-40 ... 75 °C
	Weight:	200 g

*изображение на сайте может отличаться от реального

Нет отзывов об этом товаре.