Ничего не куплено!
LTO-4-120, DAT72, DLT VS160, LTO-2L and LTO-3 Tape Rack Enclosure
The PowerVault 114T tape rack enclosure is a 2U tape array that incorporate a broad spectrum of tape technologies. It can hold up to 1.6 TB of compressed data (when using two LTO-3 tape drives) in a 2U space.
The maximum transfer rate of a single LTO-3 drive is 80MB/s. This translates into a combined native sustained backup rate of 576 GB/hr with two drives. Two SCSI ports enable both drives to run in parallel, reducing the backup time for multiple server environments.
Характеристики:
Tape Backup Technology | |
DAT72, DLT VS160, LTO-2-L, LTO-3-060 or LTO-3 (full-performance) or LTO-4-120 tape drives | |
Media | |
4mm DAT72, DLTtape VS1, SDLTtape1, Ultrium 1 LTO, Ultrium 2 LTO , Ultrioum 3 LTO, Ultrium 4 LTO | |
Maximum Storage Capacity | |
With two DAT72 drives: 72GB (Native), 144GB (Compressed) With two DLT VS160 drives: 160GB (Native), 320GB (Compressed) With two LTO-3-060 drives: 800GB (Native) With two LTO-4-120 drives: 1.6TB (Native) With two LTO-2L drives: 400GB (Native), 800GB (Compressed) With two LTO- 3 drives: 800GB (Native), 1.6 TB (Compressed) | |
Transfer Rate and Backup Rate | |
With two DAT72 drives: 25.2GB/hr (Native), 50.4GB/hr (Compressed) With two DLT VS160 drives: 57.6GB/hr (Native), 115.2GB/hr (Compressed) With two LTO-2-L drives: 172.8GB/hr (Native) With two LTO-3-060 drives: 432GB/hr (Native) With two LTO-3 drives: 576GB/hr (Native), 1152 GB/hr (Compressed) With two LTO-4-120 drives: 864GB/hr (Native) | |
Server Compatability | |
Dell and x86 IBM and HP Servers Please refer to compatibility matrix for complete listing | |
Drives | |
DAT72 Native capacity: 36GB Native performance: 3.5MB/s Reliability: 166K Hrs MTBF @ 100% Media used: DAT72 BackRead compatible: DDS4, DDS3 Interface: LVD SCSI VS160 Native capacity: 80GB Native performance: 8.0MB/s Reliability: 250K Hrs MTBF @ 100% Media used: DLT VS1 BackRead compatible: DLT1, DLT IV Interface: LVD SCSI LTO-2-L Native capacity: 200GB Native performance: 20.0MB/s Reliability: 250K Hrs MTBF @ 100% Media used: LTO2 BackRead compatible: LTO1 Interface: LVD SCSI LTO-3-060 Native capacity: 400GB Native performance: 60MB/s Reliability: 250K Hrs MTBF @ 100% Media used: LTO3 BackRead compatible: LTO2, LTO1 Interface: LVD SCSI/SAS LTO-3 (full-performance) Native capacity: 400GB Native performance: 80 MB/s Reliability: 250K Hrs MTBF @ 100% Media used: LTO 3, LTO2 read/write, LTO 1 read, supports WORM media cartridges BackRead compatible: LTO1 Interface: LVD SCSI LTO-4-120 Native capacity: 800GB Native performance: 120MB/s Reliability: 250K Hrs MTBF @ 100% Media used: LTO4 BackRead compatible: LTO3, LTO2 Interface: SAS | |
Drive Interface | |
LVD SCSI (LTO-2-L, LTO-3, LTO-3-060) SAS (LTO-3-060, LTO-4-120) SCSI controllers 39160, 39320A, PCIe U320 SAS5E controller One per drive | |
Backup Software | |
Operating Systems Microsoft® Windows® 2003 Novell® NetWare® 6.5 and 5.1 Red Hat® Linux® Enterprise 4 and 3 Backup Software Supported The following list of Backup Software is Dell tested and supported for the PowerVault 114T Rack Enclosure: Symantec® Backup ExecTM Microsoft Windows and Novell NetWare and Linux YosemiteTM Tapeware for Windows, NetWare and Red Hat Linux | |
Optimised for RapidRailsTM | |
Designed to work with Dell's RapidRails kits | |
Model/Chassis | |
Dimensions: 3.45" (87.26mm) (h) x 16.75" (425.45mm) (w) x 20.5" (520.7mm) (d) Shipping Weight: 64 lbs max with LTO-2 Tape Drive Tool-less LED for fan status Power on/off switch | |
Power | |
Power Requirements: 100-127 VAC Power Consumption: Up to 85w with two drives running | |
Environmental | |
Operating Temperature: 50 to 104 degrees F 10 to 40 degrees C Non-Operating Temperature: Drive dependent Operating Humidity: 20% to 80% Non-Operating Humidity: Drive dependent |