| Features |
| Field of application: | Industrial | |
| | Version: | Short Range | |
| Scanner design: | 2D code hand-held scanner | |
| | Light source: | Visible green light (530 nm, Aiming LED), Visible red light (630 nm) | |
| Sensor: | 752 x 480 px | |
| | Code resolution: | ≥-0.19 mm, ≥-0.25 mm 1) 2) | |
| Reading distance (at code resolution): | 50 mm ... 230 mm (0.33 mm) | |
| | Reading field (at distance): | 110 mm x 70 mm (150 mm ) | |
| Performance |
| Supported code type: | 1D, 2D, Stacked | |
| | Bar code types: | Codabar, Code 128, Code 39, Code 93, EAN, Interleaved 2 of 5, RSS, UPC | |
| 2D code types: | Aztec, Aztec Mesas, Code 49, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR code | |
| | Code alignment: | Omni-directional | |
| Horizontal motion tolerance: | ≤- 50 cm/s | |
| | OCR fonts: | OCR-A, OCR-B | |
| Interfaces |
| Serial: | Yes | |
| | Function (Serial): | RS-232 TRUE | |
| Ethernet: | Yes | |
| | Remark (Ethernet): | Optional via external connection module (CDM + CMF) | |
| CAN bus: | Yes | |
| | Remark (CAN bus): | Optional via external connection module (CAN232) | |
| PROFIBUS: | Yes | |
| | Remark (PROFIBUS): | Optional via external connection module (CDF) | |
| PROFINET: | - | |
| | DeviceNet: | Yes | |
| Remark (DeviceNet): | Optional via external connection module (CDM + CMF) | |
| | PS/2: | - | |
| USB: | - | |
| | Optical indicators: | 1 LED (good read) | |
| Acoustic indicators: | Beeper, disengageable (good read) | |
| Mechanics/electronics |
| Operating voltage: | 4.5 V DC ... 14 V DC | |
| | Housing: | Polycarbonat, UL 94V0 | |
| Enclosure rating: | IP 54 | |
| | Weight: | 185 g, without cable | |
| Dimensions: | 163 mm x 135 mm x 81 mm | |
| Ambient data |
| Shock resistance: | 50 drops From 2 m height on concrete | |
| | Ambient operating temperature: | 0 °C ... 50 °C | |
| Storage temperature: | -40 °C ... 60 °C | |
| | Permissible relative humidity: | 95 %, non-condensing | |
| Ambient light safety: | 100,000 lx, max. on bar code | |
| General notes |
| Note: | An interface cable and if necessary a power supply unit are additionally required for operation. | |
*изображение на сайте может отличаться от реального
