AS-Interface sensor/actuator module VBA-4E4A-G12-ZAL/EA2L
Цена:
ПО ЗАПРОСУ
Получить скидку и купить со склада↓
- One-piece housing with Нержавеющая сталь base
- Installation without tools
- Metal threaded inserts with SPEEDCON technology
- Flat cable connection with cable piercing technique, variable flat cable guide
- красный светодиод per channel, lights up in the event of output overload
- Communication monitoring, configurable
- Inputs for 2-, 3-, and 4-wire sensors
- DIN rail mounting
- AS-Interface certificate
- Sensor supply powered by AUX
Технические характеристики: VBA-4E4A-G12-ZAL/EA2L
| Описание | ||
| G12 flat module 4 inputs (PNP) and 4 electronic outputs | ||
| Основные характеристики | ||
| Slave type | A/B slave | |
| AS-Interface specification | V3.0 | |
| Required master specification | &ge- V3.0 | |
| UL File Number | E87056 | |
| Показатели надежности и наработки на отказ | ||
| MTTFd | 180 a | |
| Mission Time (TM) | 20 a | |
| DC (Diagnostic Coverage, Диагностическое покрытие) | 0 % | |
| Индикаторы состояния и их значение | ||
| LED FAULT | error display- красный светодиод red: communication error or address is 0 red flashing: overload of sensor power supply or outputs | |
| LED PWR | AS-Interface voltage- зеленый светодиод green: voltage OK flashing green: address 0 | |
| LED AUX | ext. auxiliary voltage UAUX- dual зеленый светодиод/red green: voltage OK red: reverse voltage | |
| LED IN | switching state (input)- 4 желтый светодиод | |
| LED OUT | Switching status (output)- 4 yellow/красный светодиодs Yellow: output active Red: output overload | |
| Электрические параметры | ||
| Auxiliary voltage (input) | 24 V DC ±- 15 % PELV | |
| Auxiliary voltage (output) | 24 V DC ±- 15 % PELV | |
| Rated operational voltage | 26.5 ... 31.6 V from AS-Interface | |
| Номинальный рабочий ток | &le- 40 mA | |
| Protection class | III | |
| Вход | ||
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC | |
| Питание | from external auxiliary voltage UEXT | |
| Current loading capacity | &le- 600 mA overload and short-circuit resistant | |
| Input current | &le- 8 mA (limited internally) | |
| Switching point | according to DIN EN 61131-2 (Type 2) | |
| 0 (unattenuated) | &le- 2 mA | |
| 1 (attenuated) | &ge- 6 mA | |
| Signal delay | < 1 ms (input/AS-Interface) | |
| Выход | ||
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof | |
| Питание | from external auxiliary voltage UAUX | |
| Current | 2 A per output 6 A total (TB &le- 40 °C) 4 A total (TB &le- 70 °C) | |
| Voltage | &ge- (UAUX - 0.5 V) | |
| Programming instructions | ||
| Profile | S-7.A.7 | |
| IO code | 7 | |
| ID code | A | |
| ID1 code | 7 | |
| ID2 code | 7 | |
| Data bits (function via AS-Interface) | ||
| D0 | ||
| D1 | ||
| D2 | ||
| D3 | ||
| Parameter bits (programmable via AS-i) | function | |
| P0 | communication monitoring P0 = 1 (basic setting), monitoring = ON, i.e. if communication fails, the outputs are de-energised P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition | |
| P1 | Input filter P1 = 0 input filter on, pulse suppression &le- 2 ms P1 = 1 input filter off (basic setting) | |
| P2 | Synchronous mode P2 = 0 synchronous mode on P2 = 1 synchronous mode off (basic setting) | |
| P3 | not used | |
| Соответствие промышленным стандартам | ||
| Соответствие директивам | ||
| EMC Directive 2004/108/EC | EN 61000-6-2:2005, EN 61000-6-4:2007, EN 50295:1999 | |
| Соответствие индустриальным стандартам | ||
| Шумозащищенность | EN 61000-6-2:2005, EN 50295:1999 | |
| Излучаемые помехи | EN 61000-6-4:2007 | |
| Input | EN 61131-2 | |
| Степень защиты корпуса | CEI 70-1/EN 60529 | |
| Fieldbus standard | EN 50295, IEC 62026-2 | |
| Условия окружающей среды | ||
| Рабочая температура окружающей среды | -25 ... 70 °C (-13 ... 158 °F) | |
| Температура хранения устройства | -25 ... 85 °C (-13 ... 185 °F) | |
| Физические/механические параметры | ||
| Стандарты защищенности | IP67 | |
| Подключение | Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector | |
| Материал | ||
| Корпус | PBT | |
| Масса | 230 g | |
| Mounting | Mounting base | |
Аксессуары и комплектующие
| Совместимое оборудование | Наименование |
| VBP-HH1-V3.0-KIT | AS-Interface Handheld with accessory |
| VAZ-PK-1,5M-V1-G | Connection cable module/hand-held programming device |
| VAZ-V1-B | Blind plug |
| VAZ-G12-MARK2-GN | Lettering set |
| VAZ-CLIP-G12 | AS-Interface accessories |
Нет отзывов об этом товаре.
Написать отзыв о AS-Interface sensor/actuator module VBA-4E4A-G12-ZAL/EA..
Ваше Имя:Ваш отзыв:
Оценка: Плохо Хорошо
Введите код, указанный на картинке: