Ничего не куплено!
Поставки и внедрение датчиков, сенсоров, систем идентификации и контроля
Mail: prom@protonpc.ru
Тел: (495) 789-41-64 доб. 294
Описание | ||
KE control cabinet module 2 analog inputs | ||
Основные характеристики | ||
Slave type | Standard slave | |
AS-Interface specification | V2.1 | |
Required master specification | &ge- V2.1 | |
UL File Number | E223772 | |
Показатели надежности и наработки на отказ | ||
MTTFd | 140 a at 30 °C | |
Индикаторы состояния и их значение | ||
LED FAULT | error display- красный светодиод red: communication error red flashing: peripheral error | |
LED INT | Internal input supply active- зеленый светодиод | |
LED PWR | AS-Interface voltage- зеленый светодиод | |
LED AUX | ext. auxiliary voltage UAUX - зеленый светодиод | |
LED -/OK | Status input signal- зеленый светодиод Off: Not connected (Only current module) On: Signal within Диапазон измерений Flashing: Signal outside Диапазон измерений | |
LED U/I | Current or voltage module- зеленый светодиод Off: Voltage input On: Current input | |
Электрические параметры | ||
Auxiliary voltage (output) | 24 V DC ±- 15 % PELV (protection class 3 according to VDE 0106/IEC 364-4-41) | |
Insulation voltage | &ge- 500 V | |
Rated operational voltage | 26.5 ... 31.6 V from AS-Interface | |
Номинальный рабочий ток | &le- 80 mA | |
Вход | ||
Number/Type | 2 analog inputs Current: 4 ... 20 mA voltage: 0 ... 10 V | |
Питание | from AS-Interface or from external auxiliary voltage as required UAUX | |
Current loading capacity | &le- 40 mA per input | |
Input resistance | For current module: 50 &Omega- For voltage module: 100 k&Omega- | |
Switching point | Changeover current/voltage module: current module with Iin &ge- 1 mA voltage module with Uin &ge- 1 V | |
Разрешение | 16 Bit / 1 µ-A (Current module) or 16 bit / 1 mV (Voltage module) | |
Programming instructions | ||
Profile | S-7.3.D | |
IO code | 7 | |
ID code | 3 | |
ID2 code | D | |
Data bits (function via AS-Interface) | The transfer of the data value is based on AS-Interface Profile 7.3. | |
Parameter bits (programmable via AS-i) | function | |
P0 | mains power frequency filter P0=1, 50 Hz filter active P0=0, 60 Hz filter active | |
P1 | projecting of the 2nd channel P1=1, channel 2 is projected P1=0, channel 2 is not projected | |
P2 | Message of peripheral error P2=1, peripheral error is reported P2=0, peripheral error is not reported | |
P3 | P3=1, normal operating mode P3=0, both channels in current mode and without recognition of wire breakage | |
Соответствие промышленным стандартам | ||
Соответствие директивам | ||
EMC Directive 2004/108/EC | EN 50295:1999-10, EN 61326:2002-03 | |
Соответствие индустриальным стандартам | ||
Electromagnetic compatibility | EN 50295:1999-10, EN 61326:2002-03 | |
Степень защиты корпуса | EN 60529:2000 | |
Условия окружающей среды | ||
Рабочая температура окружающей среды | 0 ... 70 °C (32 ... 158 °F) | |
Температура хранения устройства | -25 ... 85 °C (-13 ... 185 °F) | |
Физические/механические параметры | ||
Стандарты защищенности | IP20 | |
Подключение | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm2 ... 2.5 mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm2 ... 1.5 mm2 | |
Материал корпуса | ||
Корпус | PA 66-FR | |
Масса | 350 g | |
Mounting | DIN rail |
Совместимое оборудование | Наименование |
VBP-HH1-V3.0-KIT | AS-Interface Handheld with accessory |
VAZ-PK-1,5M-V1-G | Connection cable module/hand-held programming device |